Music: Practice & Theory Stack Exchange is a question and answer site for musicians, students, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Why do spaces between guitar frets get smaller as the notes get higher?

share|improve this question
Do you mean the difference in frequency? The ratio stays the same, and the absolute frequency difference doubles -- it doesn't get smaller. – Matthew Read Dec 2 '13 at 20:13
I edited my post to make myself more clear – Shevliaskovic Dec 2 '13 at 20:14
Because it results in pitches that are properly in-tune. – user1044 Dec 2 '13 at 22:40
The over-arching rule for fret size is the Rule of 18, which states that a fret is placed 1/18th of the distance from the nut/previous fret to the bridge. Actually, 1/17.817. And that's not quite right in every case, as the G on the low E will tend to be sharp because of the string bending implicit in fretting and the width of the string. You can't really tune a guitar, but you can get closer... – Dave Jacoby Dec 9 '13 at 17:20
up vote 26 down vote accepted

This is more clear when you think of it in terms of the length of the string. Ignoring for a second that strings need to be a minimum length in order to vibrate, we can produce a full octave on the first half of any length of string. Open for the "base" note, midpoint for the octave, one third of the way up for the fifth, etc.

So on a guitar you have the first half of the string to make up an octave. Then on the second half, you have another half of that (a quarter) to make up the next octave. Then another half of a half of a half (eighth) to make the next octave. Each time, you only have half the space for the octave. Thus, each fret has to be half the size of the fret an octave lower.

This mirrors my comment above: While maintaining frequency ratios, the absolute frequency differences changes by a factor of 2, and that is represented in the physical frets as well.

share|improve this answer

Because frequency with regard to pitch is exponential, not linear.

Exponential (frequency doubles for each octave -- each higher octave fits perfectly into the lower one with the least possible interference -- 2:1 ratio):

A3: 220hz
A4: 440hz
A5: 880hz

Linear (same value added to each successive frequency, making the top note a 3:2 ratio with the previous -- much more interference than an octave):

 A3 : 220hz
 A4 : 440hz
'A5': 660hz -- **nope**

In reality, this 660hz would be a just intonation fifth above A4, or E5.

share|improve this answer
Actually frequency is Exponential with respect to pitch, not Geometric. Exponential is P(n) = P(n-1)*K (which is also P(n) = P0 * K^n), so "frequency doubles for each octave" would be Freq(octave) = Freq(octave-1)*2. Geometric is between Linear and Exponential and is expressed as some fixed power of an index: P(n) = n^K. – RBarryYoung Dec 3 '13 at 4:08
@RBarryYoung Thanks, and great explanation of the math! – NReilingh Dec 3 '13 at 4:22

The frets are getting arithmetically closer together (their absolute distance decreases). But they are not getting geometrically closer, in terms of their distance from the bridge.

If you take the distance from the bridge to any fret (call that X) and also the distance from the bridge to the next higher lower (call that Y), then the ratio X/Y is the same whether or not X and Y are frets 2 or 1, or frets 20 and 19.

This ratio produces the frequency ratio that corresponds to the (equal temperament) semitone. It is 21/12, or about 1.0595. (The two denotes that frequency doubles per octave, and the 1/12 indicates one half-step out of a potential twelve in an octave.)

Fret 19 is 1.0595 times farther away from the bridge than fret 20.

Fret 1 is 1.0595 times farther away from the bridge than fret 2.

This 1.0595 ratio is also the frequency ratio. If you know the frequency of some given note, like A = 440 Hz, you can figure out what is the frequency of A#, one semitone higher. Just multiply 440 x 1.0595 = 466.18. The A# above the 440A has a frequency of about 466.2.

There are 12 semitones in an octave. If we multiply a number by 1.0595 and do that 11 more times, we will get about twice the original number. You can try this on your calculator. Type 1 X 1.0595. Then hit the = key 12 times. You should get a number very close to 2.

share|improve this answer

For anyone interested the common ratio between the frets would be the twelfth root of 2.

share|improve this answer
Only for a well-tempered, nonoffset fretting :-). I forget who, but someone makes guitars with frets that look a bit like lightning bolts, allegedly to enhance the resonances between strings. – Carl Witthoft Dec 2 '13 at 21:15
If the fretting is non-offset then it can't be well-tempered. Those frets you refer to are actually called "true temperament" frets. – Andrew James Dec 2 '13 at 22:13
Thanks -- I couldn't recall what they were. – Carl Witthoft Dec 3 '13 at 0:15
And in particular the word you are looking for is equal-tempered, for traditional fretting. – NReilingh Dec 3 '13 at 4:19
@CarlWitthoft, you are probably referring to the "True temperament" system ( They make fretboards with both (more) equal tempered and well tempered variants. No pure/just intonation from what I know, that would probably be to impractical. – Johan Dec 4 '13 at 15:26

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.