Take the 2-minute tour ×
Musical Practice & Performance Stack Exchange is a question and answer site for musicians, students, and enthusiasts. It's 100% free, no registration required.

My guitar/bass cable will sometimes accidentally unplug from my guitar/bass when I am playing at a practice or at a gig. It usually happens when I move around or step on my cable. Is there a way to prevent this from happening?

share|improve this question
2  
Wireless connection if you have the cash :-) –  Carl Witthoft Jan 15 at 18:01

3 Answers 3

up vote 10 down vote accepted

Yes there is a very simple way to prevent this. Instead of just plugging it in directly to your guitar/bass, you can loop it though your strap(picture coming soon).

By doing this, all the force from stepping on your cable or moving to much will be transferred to your strap and not the input jack. If you do move to far from your amp you could still yank it from the amp or pull the amp so you still do need to be spaciously aware of where you are, but this little trick has saved many performers from embarrassingly having to plug their cable back in to their guitar/bass in the middle of a song.

share|improve this answer
3  
Yes, this is what I do too. Depending on the placement of your output jack, you may want to consider an L-Jack cable. This is because you can still pull the chord through the strap if enough force is applied, resulting in the potential of bending the output jack within the instrument, which could be bad enough to require repair. The L-Jack cable will decrease the leverage and in turn the likelihood of bending the output jack itself. It could also keep the chord from poking out as far, making it less likely to get bumped (or stepped on if the instrument is on the floor, not that it should be). –  Basstickler Jan 15 at 16:55
    
@Basstickler Why don't you post that as an answer? Just because I posted a solution doesn’t mean it's the only one or the one that will be accepted. –  Dom Jan 15 at 16:57
    
I figured it was more of an addition to your answer and not a separate solution. You can feel free to add that to your answer or we could make the answer a community wiki and it in there as well. I just didn't think it merited its own answer. –  Basstickler Jan 15 at 17:14
1  
I appreciate the desire to get me some credit but I'm not overly concerned. I am more concerned that the response answers the question as well as possible so that people can use it for reference than receiving credit. –  Basstickler Jan 15 at 17:22
1  
@Basstickler (first comment) sure wouldn't want those bass **chord**s poking the music! :-) –  Carl Witthoft Jan 15 at 19:52

Wrapping the cable around your strap is also kinder to the cable. If it gets yanked (eg if you step on it), the point where the force is at its most is kind of spread out over the strap, with a bit of give, so the cable will likely survive intact.

If it's just in the plug, it'll either pull it out, or pull sideways and the main 'tug' will be straight on the bit where the cable attaches to the end plug. Quite a good chance of pulling it apart there, resulting in a disposable lead.

share|improve this answer

+1 for looping the cable through your strap.

However if you're really active moving about on on stage, why not consider investing in a decent radio system and do away with the cable altogether? It's by no means a cheap alternative, but the price of reasonable wireless systems have come down such that you only need to have to replace your trodden-on cable a few times to pay for the wireless system.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.