I have a traditional 3 saddle telecaster bridge. With two strings on each saddle my intonation is always a slight compromise. This is OK on the first four strings, but the bass strings are noticeably off. Other than replacing the saddle, are there any specific techniques I can use to reduce the problem?
Tell me more
×
Musical Practice & Performance Stack Exchange is a question and answer site for
musicians, students, and enthusiasts. It's 100% free, no registration required.
|
|
||||
|
|
|
With traditional, barrel-style, Telecaster saddles the answer is: you can't. It's not possible and living with that imperfection is part of the Telecaster's ancient allure and charm. It's a grizzled old plank that barely stays in tune and you like to beat on to make beautiful music. If it's really driving you nuts you can buy compensated saddles for Telecasters that do a pretty good job of overcoming the intonation imperfections in the 3-saddle design while staying really close to the original implementation of the saddles. I like the Intone Saddles from Glendale. Well priced, retrofit to any 3-saddle, ash-tray type Tele bridge and they're available in a variety of materials (brass, aluminium, steel, etc.) and you can even mix and match materials within a set to tune the tone to your liking. They'll let you intonate much more accurately without ruining the look or the sound of your Telecaster. |
|||||||||
|
|
You can also split the difference, set it up so that the E string is a little flat and the A string is a little sharp. |
|||
|
|
|
This method worked best for me. |
|||
|
|
|
on mine the problem was between top E and B ,I solved it by filing the saddle so that the B sounded from about 1mm longer than the E Tim. |
|||
|
|
|
intonation on the tele.this is my CURE,take a pair of pliers and grip the stem of the middle saddle and bend it to the RIGHT trial and error will get the 4th and 3rd strings to the correct intonation.(bend towards the high E) |
|||
|
|
