Take the 2-minute tour ×
Musical Practice & Performance Stack Exchange is a question and answer site for musicians, students, and enthusiasts. It's 100% free, no registration required.

me and my band are planing to play some slipknot and maybe korn (A) but we don't want to get 7-s guitars so what string should we use?

share|improve this question
    
How people can answer this without knowing the scale of the guitar? For the same tuning on different scale you need different gauge. –  Viktor Jevdokimov Jan 16 '13 at 10:22

5 Answers 5

Buy a 7 string set and use only the 6 lowest strings. They'll be the correct gauge.

Note that you'll have to adjust the intonation after a big string gauge change like that.

The biggest question that you'll need to answer is how you want to tune the top two strings? You can tune them the way the 2nd and 3rd strings are tuned on a 7 string (B and G) or like a baritone guitar (B and F#). The advantage to the baritone guitar way is that all the chord shapes you are used to will work, although the chords will all be different (for instance, an E chord shape will give you a B chord tuned that way).

share|improve this answer

I use .13-56's on my Jackson King V and they work beautifully in B, I've even gone down to A with them no problem. I use Dean Markley DT strings if that helps you.

share|improve this answer

Epica and Carcass, two bands that have guitarists that tune down to B use .13 strings (though I can't seem to find the respective interviews right now, I'm pretty sure of the fact).

That being said, I tuned a guitar down to B once with .11 strings. It's not the best option (playing gets too light), but it's doable. For metal, I'd recommend going for the .13 though.

share|improve this answer

Ah, I had to do this very recently, I grabbed a set of Ernie Ball Not Even Slinky's:

http://www.ernieball.com/products/category-916-Nickel-Wound#/product/Not-Even-Slinky-Nickel-Wound-012---056-

and they worked fine on my Telecaster.

.012 .016 .024p .032 .044 .056

I actually went a step further and tuned down to A on my Tokai Telecaster and it seems fine, a little loose, but doom all the way. Hope that helps : )

share|improve this answer

You have a couple of alternatives. Either use a heavy gauge string (13-56 or more), or get a baritone guitar. The longer scale length of the baritone means you can still have a similar level of tension in the same gauge of strings but with a lower tuning.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.