Music: Practice & Theory Stack Exchange is a question and answer site for musicians, students, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Whenever I palm mute some notes, it always sounds really soft and weak -- almost like a "blump" kind of sound. I've been wanting to get the metal and shorter palm mutes (like this). Even if I use more distortion or change the drive, it almost always stays the same. What exactly is the problem?

share|improve this question
What gear are you using and what settings do you have dialed in? – Anonymous Apr 2 '11 at 19:27
You might add compression on top of the overdrive. – Michael Easter Apr 2 '11 at 19:32
I have an RGA7 + Boss GT3 + headphones. I'll try adding compression. – Anonymous Apr 2 '11 at 20:27
@Kevin - there are some really beefy tones on the GT3 - and with the standard pickups you should be getting decent levels. What is your picking style? – Dr Mayhem Apr 2 '11 at 22:52
I usually pick with the tip... just average pretty much. – Anonymous Apr 2 '11 at 23:09

In addition to Raymond's comments, you could try:

  • Use thicker strings or drop your tuning - this will give a chunkier sound
  • Lower the action or raise your pickups to increase signal levels
  • Some pickups - eg Dimebuckers - give an excellent frequency response which works well for this kind of thing
  • Sometimes a mid pickup selector position can help, combined with more treble on the amp
  • Using really hard muting or combining left and right hand muting can beef up the sound
share|improve this answer

well there are a lot of things that can make your mutes sound harder, i think first off using a pick with a nice pointed tip helps, round edged tips tend to slide across or brush over the string also where you place the palm of your hand, either towards or away from the bridge makes a huge difference, the further you get from the brigde, the tighter it'll sound using a good noise gate helps to eliminate any ringing in between chugs too lastly, i think if you want to get a beefier mute, for instance instead of playing the low E on its own, play an E power chord and it'll sound fuller

i hope this helps!

share|improve this answer
I'd say that right-hand positioning is 99% of the sound - get it right and you'll be able to play good-sounding mutes on any setup. Two things I'd like to add are: you'll find that downstrokes give a much "chunkier" mute than alternate picking, so you might consider playing the heavier parts with all downstrokes and that adding just a bit of thumb flesh to the pick attack (as in pinch harmonics, but not quite so marked) can do a lot for the aggressiveness of the sound. – Faza May 16 '11 at 8:31

Well, I think you should play the chords with more strength.

The secret of palm mutting its the way and strenght that you play with your right hand.

Try that.

share|improve this answer

Use the pickups closest to the neck and make sure your hand is as close to the bridge as can be without ruining the sound.

I found changing pickups not only makes it sound heavier, but bigger too.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.