Sign up ×
Music: Practice & Theory Stack Exchange is a question and answer site for musicians, students, and enthusiasts. It's 100% free, no registration required.

Let's say I've written a song with the chord progression I-IV-V in the key of A (just as an example). So, the chords I'm playing are A-D-E. When playing a lead over this rhythm, what notes do I need to stick to over each chord? That is, when playing an A chord, should I stick to the notes that compose the chord? Are there rules for which notes sound good over which chords? When I move to D, are there notes I should avoid or continue?

I'm asking because I have a melody I like and I'd like to back it with rhythm guitar, but I'm not sure how to choose chords (basically the other way around from how I asked the question, but I'd like to know both). I'm just starting to learn musical theory and I'm not sure the best way to phrase my question.

share|improve this question

5 Answers 5

There isn't one definitive answer to this question besides "Try to be Paul McCartney." That said, here are some guidelines that I hope prove helpful:

Mix It Up

Don't just use chord tones (meaning, notes that are in the chord you're playing at the moment) and don't just use non-chord tones. Non-chord tones will give your melody a sense of momentum and tension, while chord tones will give your melody a sense of stability and release. Of the chord tones, roots and fifths have the most stability, while thirds and sevenths strike a nice balance. Too much of either is no good: too much tension and momentum, and you run the risk of your melody running out of control, which ultimately feels chaotic. Too much stability, and your melody will sound dull and boring.

Voice Leading

This basically means that your melody shouldn't jump around too much---a few big intervals are fine and can be really dramatic, but most of the time, your melody should stick to stringing together notes that are near each other. Otherwise it's hard for the listener's ear to keep up.

For example, say you're playing the A-D-E chord progression you mentioned. C# is the third of the A chord, and D is the root of the D chord (obviously). So a melody that plays the C# and then the D is employing voice leading.

Choosing Chords

So you have the opposite challenge: to pick chords to fit a melody. As before, there's no one right way to go about this, but again, here are some guidelines:

  • Identify the notes in the melody that feel more stable as opposed to those that feel as though they have momentum and movement and use those to help inform your chord choices.
  • Identify the few notes with the most drama. These probably shouldn't be chord tones, but might resolve to chord tones.
  • Chord progressions have their own momentum and stability. I chords are stable; V chords have momentum. You resolve a V (or V7) chord to its corresponding I chord. Unless you absolutely know what you're doing, make sure your V chords resolve or the song will leave your listeners feeling unsettled.

Example: "Eleanor Rigby"

"Eleanor Rigby"---"Rig" and "by" are both chord tones, and the melody lands on "by" like a rock. That note is the root of the chord, and it provides a lot of stability for the melody, which is good because the next line is...

"Picks up the rice in a church where a wedding has been"---"Rice" and "church" aren't chord tones, and they have a lot of momentum. This line is almost like a roller coaster: "Picks up the" is the initial ascent, followed by a briefly held point of tension on "rice", then a quick fall, a quick rise, and then another briefly held point of tension on "church", another fall, etc. It ends on "been", which is a chord tone for the next chord (the IV chord). Stability and release after the tension and drama of the roller coaster. Paul knew what he was doing.

I could go on, but it would take a long time, and this the main idea. Good luck, and enjoy the adventure of composition!

share|improve this answer
I like this one. I've gone as far as putting some chords behind "Twinkle Twinkle Little Star" once, but this takes it a step past. Good answer. – VarLogRant Mar 17 '11 at 2:10
I will try my hardest to be Paul McCartney, thank you! Seriously, though, this is great exposition of that simple exhortation. – Anonymous Mar 17 '11 at 15:43
Great example :) – Matthew Read May 28 '11 at 16:08

I am not very good at theory, but I will leave my observations here. There are a few ways to approach this problem:

Got melody, want chords

  1. Figure out the key in which your melody is in.
  2. Figure out the triad chords can you play in that key (for example Cmaj/Amin key: Cmaj, Dmin, Emin, Fmaj, Gmaj, Bdim).
  3. Carefully check your melody and use the chord based on the dominant notes, usually this is simply the note which is played on the beat. So, if my key is C and the melody has a note D when the beat comes, I play Dmin, but also note that most of the time more than one chord sounds good in a particular situation.
  4. Don't stop when you got the chords, give them a twist (another note, different rhythm, a few notes connecting chords), using simple triads won't sound very innovative.

Got chords, want melody

  1. Figure out your key, this is essentially matching the notes in your chords to a key in which those notes are possible.
  2. Now you know the key and the notes you can play in that key.
  3. Try to move in this key, first follow the chords.
  4. Deviate from the chords and try to make it sound good. Unfortunately, there really is no recipe for writing melodies.

Alternative method

  1. Let the chords/melody repeat.
  2. Experiment until you are happy.
share|improve this answer
Nice, very simple and straightforward. – Anonymous Mar 17 '11 at 15:14

The buzzword your question dances around is voice leading. Look that up in your textbooks.

The literal answer to your question is "there may be no relationship at all." For example, Bach's "Goldberg" variations include a few dozen instances of the same chord progressions (rhythm chords), each with wildly different melodies.

share|improve this answer

When I'm improvising harmony to a melody, I 5th chord tone track the harmony notes of the melody (usually the 1st and 3rd beat notes of each measure) except for Resolutions (I chord)at the end of verses, Turnarounds(V7 chord) to set up next verse, and Break (I7 chord) to set up the Bridge. Also, since most Bridges start on a IV chord and end on a V chord, those are what I use to start and end Bridges. I call this "5th Chord Tone Tracking".

share|improve this answer

When a chord is being played along with a melody, most melody notes which aren't in the chord will create "tension" and will want to move toward one of the chord tones (generally the nearest). When a melody moves from a chord tone to a non-chord tone, tension will significantly increase; when it moves from a non-chord tone to a chord tone, tension will significantly decrease. While some chord tones may have a little tension associated with them, and so movement between chord tones generally has only a minimal effect on tension.

Much of what makes music interesting is the creation and release of tension. Some pieces of create tension at the start of each measure and quickly resolve it, while others release tension and the start of each measure but then quickly impose it again. In many cases, even playing the melody unaccompanied may create sense of tension and release; in melodies where that is true, one should generally try to place chords so that they fit the "non-tense" notes in the melody. If a melody doesn't have a clear sense of "tense" and "non-tense" notes, it may be necessary to experiment. Some melodies can be harmonized so as to create either a "tense-relax" or "relax-tense" pattern.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.