Take the 2-minute tour ×
Musical Practice & Performance Stack Exchange is a question and answer site for musicians, students, and enthusiasts. It's 100% free, no registration required.

I like to practice at home with my electric guitar, but I have to keep the volume low, so I usually use headphones connected to my P.O.D. 2.0 guitar direct box. But sometimes I'd prefer to use speakers (at a volume comparable to an accoustic guitar).

As this is just a hobby, I don't want to invest a lot of money, so I've tried to simply connect the POD (headphone out) to the 2.1 active speaker system I usually use for watching TV. However, to my surprise, this gives me a lot of ringing/rattling/clanking - although I can turn the speakers up to a much higher volume when watching TV without these problems (I also simply connect the speakers to the headphone out there). So I tried reducing the bass and volume a lot, until the problems go away, but then the sound is really bad. It doesn't have anything in common with the sound I get from the headphones.

I always thought, that it should be possible to connect a Hifi system to a POD - but I must be doing something wrong?

share|improve this question
1  
Shopping recommendations are off-topic, so I edited your title to make it better fit the body of your question, which seemed to be about troubleshooting. I'm sure someone will still tell you what kind of speakers to look for if the problem can't be fixed. –  Matthew Read Aug 26 '11 at 15:29

1 Answer 1

up vote 2 down vote accepted

My HI-FI system (a basic compact hi-fi system) is the only output I use with my POD X3 and I'm really satisfied with it. It's connected through left/right RCA cables.
I don't see why it would not work with a POD 2.0.

I see few possibilities :

  • The cables / connectors you are using are cheap (but if you use them with you TV, I guess it's not that)
  • The output of the POD is too high for the speaker. I think this is the most probable reason but it seems that you already tried to lower the volume... But be careful of what volume you lowered : if it changes the sound it looks like you lowered the amp volume (chan vol), but does the POD 2.0 have a "master" volume (POD X3 has it, seems to be output level with 2.0).
  • Another solution may be to lower the volume with the "mix table" (in POD X3, there is a special location where you can boost / reduce the overall volume of the effect chain. It is generally placed after the amp output. I don't know if it exist for 2.0)
share|improve this answer
    
First of all: It's good to hear, that you could make it work with your POD! I already lowered the master volume on my POD. I don't think I have a "mix table", but I'm not sure where to find it... –  Chris Lercher Aug 26 '11 at 17:35
    
Another question: Are you connecting your cables to a line-in of your Hi-Fi system? Mine is a very simple one, and all it has is a single headphone connector (male mini TRS) - that's it (but it does produce great sound when listening to music). For my POD's line-out, I can choose between "direct" and "AMP" mode - so should I maybe prefer to connect my speakers there (with an adapter)? –  Chris Lercher Aug 26 '11 at 17:36
1  
Yes I'm using the Hi-fi line-in... I have this system : reviews.cnet.com/audio-shelf-systems/philips-mz-7-micro/… which has a left/right RCA line-in. For the output, you should select the "direct" mode. You should plug your sound system on one of the left or right output of the POD with an adapter (except if you absolutely need a stereo sound) –  Julien N Aug 28 '11 at 17:56
1  
And, if you didn't do it already, check the 3.3 chapter of the manual (l6c.scdn.line6.net/data/l/c0a8090b14eb9404fb8507db90/…), there are some tips –  Julien N Aug 28 '11 at 18:08
    
I just plugged the line-out of my POD ("direct" mode) to a mixer, and then the speaker system to the headphone-out of the mixer. It works really well. Thanks. –  Chris Lercher Aug 29 '11 at 18:57

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.