Music: Practice & Theory Stack Exchange is a question and answer site for musicians, students, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

You know, many sheet music books are quite springy and would rather close than stay open on the music stand while practising. How do you keep them open while allowing to turn the pages easily?

share|improve this question
3  
2016 answer: Take a photo of the page(s) in question with your tablet and put your tablet on the music stand. A quick swipe advances the pages more easily than trying to find the corner to turn the page. – Todd Wilcox Jan 10 at 5:31
2  
@ToddWilcox It does have some drawbacks; most tablets are smaller than music books (which are a little larger than A4) and it is a source of light, which doesn't matter very much under normal practice conditions, but in a dark performance hall it might be very distracting to either the audience or the performer. – 11684 Jan 10 at 10:24
    
@11684: I'd say a tablet is more useful in a dark performance hall, because you don't need an extra light source. If it's too bright, you can always just turn the brightness down! Perhaps even invert the contrast – a white-on-black OLED display emits far less light than you can ever hope with an illuminated paper print, while still being readable. – leftaroundabout Jan 10 at 12:25
1  
I don't like this idea because I'm just dogmatically sticking to the tradition of paper sheet music, but I suppose you have a point. As long as I can still use my unpractical paper :) – 11684 Jan 10 at 16:36
up vote 12 down vote accepted

Use a music clip. There are two kinds. When I first started playing piano, I was using one of these:

enter image description here

You put the clip around the top of the book, which holds it flat. Problem is, it doesn't work well for large books which are too thick to fit the clip, and when you're playing something at the beginning or end of the book the two sides become unbalanced. It would often fall off in those cases. Several years later my piano teacher saw me using one of those and gave me this to use instead:

enter image description here

This kind of metal clip is so much better. It works for books of all thicknesses, and is able to hold the book more securely. Do note that it could damage the cover of the book, especially if it is thick and has a glossy cover. But this is a price worth paying for not having to deal with the inconvenience of a plastic clip.

share|improve this answer
6  
And how do you turn pages with a clip on your book? – 11684 Jan 10 at 10:23
5  
Place the leftmost part of the clip on the first page and the rightmost part on the last page of the piece you are playing. Of course this runs the risk of pages flipping over by themselves, but it beats having no clip at all. – Tony Jan 10 at 17:49
    
Brilliant! @Tony – 11684 Jan 10 at 22:04

My favorite method is to use clothespins to clip the edges of the book to a music stand. If the dimensions of either the book or the stand don't allow that, I use the clothespins to clip a ruler or a similarly sized piece of wood to the front of the book to keep it open.

If the book is stapled together and not too thick, bending it backwards a few times also helps. But with the really thick books, that will just break the binding, and I don't want to damage my books like that.

share|improve this answer

I've had books re-bound with a spiral binding through a local print shop. The binding is less durable in that it's easier for pages to rip out with this binding, but it allows the pages to stay flat. If you have a lot of books, this may be prohibitively expensive.

share|improve this answer
    
Nowadays, my preferred method is to scan the pages and place them on an iPad. The downside, of course, is that now I have twice as many page turns... – Babu Jan 9 at 15:23
2  
You can also buy a comb binder and do the binding yourself. You sand the spine off of the book with a clamp and a belt sander, then punch it and bind it with the comb binder. – empty Jan 10 at 17:50
    
@Babu sounds like you need an iPad pro in landscape:) You can thank me later. – Shawn Strickland Jan 13 at 20:16

The "standard" method is:

  1. Lay the spine flat on a table and fold each cover down.

  2. Fold down 1 or more pages from the front and 1 or more pages from the back.

  3. Continue folding from each side until you get to the middle.

This way does not break the binding.

share|improve this answer
    
Do you have a source for this? – NᴏᴠɪᴄᴇIɴDɪsɢᴜɪsᴇ Jan 9 at 20:23
    
My teacher in fifth grade show us this method. – Nachmen Jan 9 at 22:36
    
@NᴏᴠɪᴄᴇIɴDɪsɢᴜɪsᴇ I learned it from a school film in the 80s that was probably made in the 60s. But google isn't finding it right now. – luser droog Jan 10 at 5:50

If you aint got any of that on the hand you could use an other (heavy) book and put it on the edge of the book that is supposed to be open.

share|improve this answer
    
The only concern I'd have about that suggestion is that the music stand may not be big enough to support two books on either side of the main music book. – cjm Jan 9 at 22:00
    
@cjm how do you turn a page with two heavy books on the sides. – Nachmen Jan 9 at 23:03
    
@Nachmen you just become more experienced in turning pages this way since it is the most convenient way when you are not practicing at home. – Guney Ozsan Jan 10 at 14:16

I cut the glue binding off the music book, ripping it on a table saw, and punch holes in the pages to fit them in a three-ring binder.

share|improve this answer

If you want to have the book but it should open easy. Take it to a copier/printer shop. He will have a machine that can cut through alot of paper in one time. Give him the book he should cut the book at the spine 2mm in to the paper, then the back that is now exposed hold it firmly in place that the book pages should be all the same, not one page should stick out. There a special glue that when it dries its elastically. Smear the glue on the spine, when its dry: voila, here's your book. When you open the book it's like separate pages, but its being held together by the glue. I hope I was a help.

share|improve this answer

What I often do for this is just continually bend and crease the the book backwards until it stays.

  1. Open to the pages that you are reading from.
  2. Bend both sides of the book back so the ends of the book are behind the spine.
  3. Slide your hand along the spine, creasing it with your hand.

You may have to do this a few times for it to work. This does not cause any damage to the book; source: I do this for all my books.

An alternative to keeping the book open would be to find a flat-bed scanner and print out the pages you are working with. Then, simply line up the papers however works best on your stand.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.