Music: Practice & Theory Stack Exchange is a question and answer site for musicians, students, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

When looking at the Wikipedia article about "loudness", I'm presented with the following picture:

Diagram from Wikipedia

From my understanding, this represents the threshold for how loud a certain sound has to be to be perceived. If there only would be one curve, I would have no problem understanding the diagram. However, why are there several curves depicted? What do they represent? I can't wrap my head around this.

share|improve this question
up vote 5 down vote accepted

Each red line represents a loudness level (measured in phons). That is, for a given red line, every point on that line is perceived as equally loud.

This is a way of representing a 3d graph on a 2d medium. The x and y axes are sound frequency and sound pressure level (decibels), respectively. The z axis is a subjective measure, "Loudness". Now, we have no way of actually representing this z axis on a computer screen, so there are a couple of solutions. One is using some sort of flash applet to render the 3d graph in a way that allows the user to rotate it. Another is using a 45-degree angle view of the 3d graph.

The method used here is much simpler to produce; instead of going through all of the grief involved in 3d rendering, we'll display slices of the 3d graph and label how far up or down those slices would be in 3d.

Anyway, that was very long-winded. The point of this graph is to show that neither frequency nor sound pressure level is enough to determine loudness on its own; the combination of both of those factors as well as the anatomy of the ear determine loudness.

share|improve this answer
Great answer. Remove the reference to my answer, because it is now redundant I am going to delete it. – slim Dec 6 '11 at 17:15

You are looking at the Fletcher-Munson equal loudness curves.

The point, which no other answers have explained yet, is that this is a graph of how the human ear responds to sounds and loudness. The human ear and brain do not perceive a linear increase in sound pressure levels in a linear fashion, and the human ear and brain's perception of the volume of a given area of the frequency spectrum, in relation to all other areas, is different at different sound pressure levels.

When I studied recording studio engineering in college, this graph was used to impress upon us that music recordings must be made, mixed and mastered with the human engineer listening at a moderately loud volume level (80 decibels or so), because if one were to listen at too low a level, one's ears would not give an accurate reflection of how the music would sound to a listener playing it back on a car radio, stereo system, or what have you. For example, if recording and mixing were done with the engineer listening to a very low volume, one would mix in too much bass to over-compensate for a perceived lack of bass in the recording. Then when consumers played the recording back on their stereo systems, there would be much too much bass coming out of their stereo system.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.