Take the 2-minute tour ×
Musical Practice & Performance Stack Exchange is a question and answer site for musicians, students, and enthusiasts. It's 100% free, no registration required.

I have a fifty year old F.E. Olds & Sons Ambassador cornet. It lay unused for 30+ years (it is now oiled and greased properly). There is considerable tarnish on the mouthpiece and on the slides. Any suggestions for removing the tarnish?

Will toothpaste or aluminum foil work, or will they have side affects to the tarnished area?

share|improve this question

1 Answer 1

up vote 1 down vote accepted

The mouthpiece is likely silver plated; silver polish will work well on that, as would the aluminum foil trick. (Since it's silver plated as opposed to solid silver, perhaps try that trick first.)

I think the aluminum foil trick: http://scifun.chem.wisc.edu/homeexpts/tarnish.html will likely be the least damaging, but I'm not an expert in metallurgy.

The slides could be silver plate, or (in my opinion more likely) nickel plate. My nickel plated trombone bell didn't tarnish as "dark" as my solid silver one. It was more of a brassy look, likely because of the copper in the nickel silver. I can't say you'll always be able to tell the difference… but it's a shot.

Nickel silver can usually be cleaned and polish like silver; all mine have been fine with that, as it's designed to be a silver look-alike. Check out this resource: http://www.ehow.com/how_5210485_clean-nickel-silver.html.

I don't personally know about toothpaste, as I haven't heard of it's use. I'd imagine it'd put a slight patina of small scratches on any polished metal, as it's an abrasive.

Whichever technique you ultimately use, clean all pieces thoroughly before reassembling and using.

share|improve this answer
    
As for toothpaste, abrasives making scratches is how we create a brilliant polish, as when we grind a mirror or lens. It's a matter of creating small, very fine scratches. Toothpaste is a fine enough abrasive that you will not have to worry about dulling the metal finish. –  MετάEd Jan 25 '12 at 6:31

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.