Music: Practice & Theory Stack Exchange is a question and answer site for musicians, students, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I was planning to buy an electric guitar and is offering Epiphone Les Paul Junior Guitars at a seemingly reasonable deals. The related question that I have is: what's a junior guitar?

What's the standard length of a fretboard on a guitar (and how many frets should it normally have)?

Does a junior guitar have lesser number of frets or is it that the fretboard is just scaled for young teenagers?

If one starts with a junior guitar, how difficult is it to switch to a normal guitar?

share|improve this question
up vote 9 down vote accepted

The Les Paul Junior is not a different size guitar, it's simply an entry-level Les Paul model. It was originally designed to be an affordable alternative to the Les Paul Standard, and thus is not as fully-featured. The main differences compared to a traditional Les Paul are:

  • flat top instead of carved top
  • only one pickup, usually a P90
  • consequently, also only one volume and tone knob
  • wrap-around tailpiece instead of the tune-o-matic bridge and tailpiece
  • in Epiphone's case, a bolt-on neck, rather than a set neck

You can read more about the Les Paul Junior in the Wikipedia article. Also, you can compare the specs of the Epiphone Les Paul Standard and Les Paul Junior. As far as I can see, they both have the same scale length (629 mm / 24.75") and number of frets (22).

If you start with a Les Paul Junior, you shouldn't have any difficulty switching to a higher-end Les Paul model, save perhaps having to adjust to a second pickup and more tonal options at your disposal.

share|improve this answer
I had confusion in three points: top, bridge and neck. I googled and understood what types of bridges are available in the market. Same about the necks. But I haven't understood the difference between flat-top and carved top guitar. Both look same to me in the pictures. Thanks for the great answer! – Shashank Sawant May 24 '12 at 0:34
@ShashankSawant See this question for some discussion of carved-vs-flat-top. – luser droog May 24 '12 at 0:50
@ShashankSawant In case you can't find the answer from the above link, carved (or arched) top means that the body of the guitar is not uniform in thickness - it's thicker in the centre, especially under the bridge, and thinner towards the edges. See this image for a good example. This usually provides better sustain, but is more expensive to produce. Flat top, as the name suggests, means that the top of the guitar is completely flat. – Indrek May 24 '12 at 0:58
I was confused as to what "top" is. In the 2D view all guitars (almost all - excluding those arrow shaped one perhaps) are curved. Now I got it. Perfect! – Shashank Sawant May 24 '12 at 1:38

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.