Take the 2-minute tour ×
Musical Practice & Performance Stack Exchange is a question and answer site for musicians, students, and enthusiasts. It's 100% free, no registration required.

Is it the size of the drum? The width? The length? Particular body materials? Particular head materials?

Given that there are a hundred different kinds of drums in the world with very different sounds, what are the most common characteristics that make it very loud all other factors held constant?

share|improve this question
5  
According to our drummer: hitting it hard:-) –  Dr Mayhem Feb 13 '13 at 8:08
    
Loudness is a subjective property. Therefore it not only depends on the drum, and the player (which was already said) but also on the listener. –  ABC Feb 14 '13 at 4:03
    
Journal of the Acoustical Society of America / Volume 5 / Issue 2 Next Article Loudness, Its Definition, Measurement and Calculation J. Acoust. Soc. Am. Volume 5, Issue 2, pp. 82-108 (1933); (27 pages) Harvey Fletcher and W. A. Munson, There is can be seen how ridiculous is the statement "The loudness is the amplitude of the vibration by the way." –  ABC Mar 10 '13 at 16:40
    
The answers to this question so far have just given a more verbose rendition of the relevant parameters already noted in the OP. can someone please answer at least one of the questions? Even anecdotal evidence would be helpful. –  themirror Mar 12 '13 at 18:22
1  
Also in case the above isn't clear, this is a question about what makes a drum loud not what makes a drummer loud. –  themirror Mar 12 '13 at 18:24
add comment

2 Answers 2

Well, I can't give you any two dimensional Fourier Analysis here but if I put my practical engineer hat on I can give a rough idea. A drum itself is a passive device in other words you can't extract energy from it without giving more into it. Therefore, as Dr.Mayhem's comment hints the harder you hit, the more energy you put into.

Now the moment you hit the drums all kinds of weird stuff(technically speaking here :) starts happening. The very first thing you need to catch is that the drum stick/mallet or whatever the excitation is given by needs to be taken away as fast as possible otherwise some of the energy is absorbed by the stick. So stick control is essential. When you listen to professionals and amazing greats you'll see that the stick almost never stays on the head. That's why they can sound really loud without actually banging.

After that the the drum itself is the definitive part. The material of the shell and the type of the heads need to resonate. You can think of this as pushing someone on a swing. If you wish to increase the speed of the swing you need to push the swing when it reaches the top point and stays stationary for a moment. Instead if you push early you absorb some energy yourself before the swing starts moving again. Similarly if you push too late you can't exert full force.

So that kind of interplay is essential between the material and the heads. If they work against each other, that drum would sound quieter compared to others. If they work in unison then suddenly it feels like the drums are running on amplifier.

Also the difference between a rimshot and a regular head stroke is related to this. The rim shot also excites the shell vibrational mode together with the heads hence leads to a bolder sound.

Moreover, you might want to balance your precious input energy between high freq and low freq vibrations. In other words, too low tuning would not excite the drum as a whole and the energy would be dissipated via friction due to low tension. Or too high tuning and most of the energy would be spent on high freq overtones instead of high amplitude low freq vibrations since the drum would not have any space to move.

The loudness is the amplitude of the vibration by the way. So if different waves get on top of each other you get a louder sound, if they cancel here and there you would hear complicated ringing. This is essential to any music instrument for harmony etc. so I have to skip that part.

In summary you put finite amount of energy, in turn, the drums and the sticking defines how it is dissipated. It's a different ball game to expain which wood goes with what and unfortunately it's more of an art rather than science. You might encounter some die-hard maple-birch arguers but in the end it's just physics of the head and shell.

Sorry for the vague answer but the underlying mechanism to this innocent question is really a monster to describe. You can check a lot of drum tuning videos online to see what they are trying to achieve to get some perspective.

share|improve this answer
    
Agreed. This isn't an easy question to answer without getting into a lot of physics/math; just trying to explain what gives things volume to begin with is difficult enough. Which, by the way, isn't just a matter of increasing the amplitude of a sound wave, it's much more involved than that. –  Tony Feb 13 '13 at 21:59
    
@Tony Sure but I couldn't find any other approximation suitable to type in here without any math. –  percusse Feb 13 '13 at 22:01
    
I've cleaned things up here again. –  Matthew Read Feb 15 '13 at 16:11
add comment

Considering the size a combination of width and length, I'd say width one gives you the key (bass drum is wider, for example), while length, or depth we could say, gives you the amount of air in which the sound wave can bounce, amplifying the sound and giving it sustain and loudness.

Materials too take their part in this, because they make the wave bounce in different ways, stopping it, altering it or amplifying it furthermore.

share|improve this answer
    
Oh well, I would expect a downvote coming with some sort of explanation... :) –  Frhay Feb 18 '13 at 7:56
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.