Electrical or electronic equipment used to make music louder, characteristically used with electric guitars, but also with other instruments

learn more… | top users | synonyms (1)

1
vote
1answer
433 views

Making electric guitar sound like semi acoustic

I've recently bought an electric guitar and I'm wondering can I make my electric guitar sound like a semi acoustic one... What should my amp settings be. Any help is much appreciated :)
1
vote
4answers
144 views

Trying to get sound from two amps through two headphones

I've got a guitar and a bass with separate amps. I want to be able to get sound from both amps into two pairs of headphones. But I can't even get the sound from one amp into two headphones. When I ...
1
vote
1answer
173 views

can some one help me for set my amp for j-rock?

I have started playing 1 week ago. I don't understand how to completely set my amp. Can some one help me for set my amp for j-rock? I use blackstar id core 10. I use blackstar's amp software for amp ...
1
vote
1answer
356 views

Getting a Clean Sound with a Vox VT20

I've bought a Vox VT20 and while it's great, I'm having a hard time trying to get the cleanest sound possible. So far, I've found that the only way to do this is by turning on the tuner, but having ...
1
vote
2answers
111 views

Bass guitar amplifier [duplicate]

I have a guitar amplifier at home and I am playing bass in a band. I am practicing at home and I wonder if I can use the guitar amplifier with the bass or will it damage the amp?
1
vote
2answers
3k views

Can I connect an amplifier head to the top of my existing amp?

I have a HIWATT G50MR and have thought about buying a stack, but I was wondering if I could just buy a amplifier head and connect it to the top of my existing amp. Is this possible?
1
vote
3answers
30 views

Phantom Power supply or usb audio interface?

I recently just purchased a new condenser microphone . I wasn't sure if I should just buy the Nady SMPS 1 channel power supply or just save up and just get a usb audio interface ?
1
vote
0answers
35 views

Preamp Valve gone in 'hissing' amp?

Roughly 3 years ago, I purchased a VHT Special 6 Ultra (Combo) Valve Amp. It has recently been 'hissing' (not sure if this is the correct description), and this noise increases with higher wattage and ...
1
vote
1answer
61 views

Put a monitor on top my amp

I'm currently making an home studio, I don't have all that much space and I want everything as efficient as possible. I was wondering that if i put my "sansui au 3900" in the middle of my desk and ...
1
vote
1answer
1k views

Using a looper live - how to connect playback and overdub to 2 different amps?

I currently bought a Boss RC-2 Loop station because I want to play the second guitar in my band as well. My problem now is that I don't want the two guitar tracks - playback and overdub - to come from ...
0
votes
1answer
307 views

Fender guitar preamp

My son wants an acoustic-electric guitar. The one he picked out has a preamp. I know absolutely nothing about guitars, so does he need a seperate amp if this one has a preamp?
0
votes
3answers
4k views

Amplifier has no aux in, what alternatives can I use?

As stated my amplifier has no Aux in jack. It's hindering me from practicing with an otherwise (imo) great amp (a Vox Pathfinder 15r). Been thinking of using this to interface between the music ...
0
votes
1answer
819 views

No sound plugging effects pedal into combo amp

I tried to use my distortion effects pedal through the guitar input of my combo amp, and I get no sound! I used it in effects loop and worked fine and amp works fine when guitar is plugged straight ...
0
votes
2answers
104 views

Can it be wrong to use a series resistor in a 2x12 cabinet to have matching impedances?

I made a wood frame for 2 speakers, intending to create my own 2x12 cabinet, but now i realised my speakers are 8Ohm and 4Ohm, they don't match, meaning i would get a weird value when matching them. ...
0
votes
2answers
63 views

Ohms / Impedance [closed]

If my understanding of 'OHMS' is correct ...4 ohms would be greater than 8 ohms. so with this said ...could I take a 4 ohm head and run it thru 2, 8 ohm cabinets( with single speakers each, lets say ...
0
votes
1answer
36 views

Do I need an amp for my guitar if I have an audio interface?

I've been playing the bass for a few years now and want to start recording some of my songs. I've also just moved cities and am trying to save on space/money/number of belongings, so I'm a bit unsure ...
0
votes
2answers
76 views

Entry level guitar amp, as a gig amp for hobbyist

Is it a very bad idea to use an entry-level 15W rms guitar amp (mini-cubes i.e. amp+cabinet combo, which otherwise is quiteloud), for as a small gig-amp into which one uses a passive 4-channel mono ...
0
votes
1answer
1k views

Electric guitar amp won't switch to distortion channel

I have a Peavey Classic 30 combo amp (tubed). There's a channel switch button on the amp that is meant to toggle between the clean and distortion channels. However when I attempt to toggle from clean ...
0
votes
5answers
57 views

Using a microphone through a guitar amplifier

I'm going to buy a Shure microphone SM58 type but I only have an old Peavey amplifier. The plugs are different. How should I do then to use my microphones, do I need a converter or to buy a new ...
0
votes
2answers
1k views

2 Heads on one Cab?

I have two Half stacks, one Marshall and one Kustom. My question is can I plug the two heads into each cab? What I want to end up doing is have an ABY switch from my guitar straight to the Marshall ...
0
votes
0answers
17 views

does changing my bridge affect my guitar tone? [duplicate]

does changing my bridge affect my guitar tone? I want to change it into floyd rose bridge
0
votes
0answers
43 views

Marshall G100RCD

I was wondering if I could use the Marshall five way foot switch with my Marshall G100RCD? I was going to get the standard pedal, but thought about the five way instead.
-1
votes
2answers
1k views

How to achieve a good tone with a small guitar amplifier [closed]

I recently purchased a new electric guitar and a 10g fender amp. I am wondering what settings I should use on my amp for amp rock sound. My dials are: Gain Volume Treble Bass
-1
votes
1answer
38 views

Electric guitar amplifier works with headphones but not without

So the problem is whenever I plug my headphones into the amplifier, I can hear the sound amplified but if I unplugged the headphones, the amplifier does not release any sound. What could be the cause ...
-2
votes
1answer
131 views

Can you use a Marshall single channel footswitch with a MG102FX 4-channel amp?

I have a four-channel MG102FX amp. Will a single-channel pedal work with it? Both are Marshall. Help, please! I just want to be able to go from clean to distortion.