3
votes
2answers
134 views

Peavey XXX amp - weak / overly loud clean channel

Problem I own a Peavey triple X (XXX) amp. I like most of the amp, but its clean channel is just to clear and clean for me. I mainly play metal/rock and I need the clean sound warmer, compressed and ...
7
votes
3answers
231 views

What is the difference between an amp and a head?

At the moment I currently only use a basic guitar amp, but a few of my friends have 'heads' on top of their amps. What is the purpose of these? What do they do that the amp doesn't do?
6
votes
2answers
339 views

Can I plug my amp directly into my audio interface?

Could anyone tell me, can I plug my guitar amp directly into my audio interface (with the "line out")? On some forums people say that you can't , on others people say you can... If it's possible, is ...
10
votes
5answers
2k views

Is it okay to sit on guitar combo amplifier?

I just bought a 1x10" Marshall combo guitar amp, and I've read in articles that many guitarists sit on their amps. Is it okay to sit on it? Is there any chance of breaking it as a result?
2
votes
1answer
864 views

How can I play with an amp simulator through cubase?

I recently bought an Alesis iO2 Express recording.. thingy. It came with Cubase 5. I downloaded and installed some amp simulators into the software. Currently I can only figure out how to apply the ...
4
votes
2answers
104 views

What notes relate to the EQ on a guitar amp?

On a standard guitar amp, there are three EQs lows, mids, and highs. I know the lows affect the low frequencies, the mids affect the middle frequencies and the highs effect the high frequency. What I ...
5
votes
2answers
645 views

Setting up Distortion on an Amp

I'm new. I've been trying to play the song 'I Stand Alone'. I can read tabs and I can get my guitar in drop C, I am just not getting the heavy distortion noise. I'm wondering how I should adjust my ...
0
votes
1answer
138 views

Fender guitar preamp

My son wants an acoustic-electric guitar. The one he picked out has a preamp. I know absolutely nothing about guitars, so does he need a seperate amp if this one has a preamp?
1
vote
2answers
899 views

Cannot get rid of pedal / amp noise (Hiss) [duplicate]

I have a Marshall JVM 410H. I have the following pedals setup: For the front of the amp I have: Guitar > Compressor Sustainer > Chorus > AMP (input) In the effects loop I have: Isp decimator --> ...
3
votes
2answers
318 views

Guitar audio interface matching tone of my old amp, and a problem

I just finally got a decent audio interface (M-Audio MTrack) and now I'm trying to figure out how to make nice sounds with the virtual amps in Logic, and Amplitube LE. I figure now I have creative ...
4
votes
2answers
1k views

Switching amp heads with pedal

I was listening to Killswitch Engage and decided to look Adam D's rig up. He's used multiple amps and guitars, but is sparse with pedals. When reading this I started wondering how they achieve cleans ...
1
vote
1answer
333 views

How important is a good amp? [closed]

I always wanted to know the importance of a good amp for a guitar. Do I rather need a 50w tube amplifier that sounds like heaven, or is it already enough if I get a good pedal? Or do I need both? I ...
0
votes
3answers
2k views

Amplifier has no aux in, what alternatives can I use?

As stated my amplifier has no Aux in jack. It's hindering me from practicing with an otherwise (imo) great amp (a Vox Pathfinder 15r). Been thinking of using this to interface between the music ...
0
votes
1answer
399 views

No sound plugging effects pedal into combo amp

I tried to use my distortion effects pedal through the guitar input of my combo amp, and I get no sound! I used it in effects loop and worked fine and amp works fine when guitar is plugged straight ...
0
votes
2answers
2k views

Can I connect an amplifier head to the top of my existing amp?

I have a HIWATT G50MR and have thought about buying a stack, but I was wondering if I could just buy a amplifier head and connect it to the top of my existing amp. Is this possible?
0
votes
2answers
574 views

2 Heads on one Cab?

I have two Half stacks, one Marshall and one Kustom. My question is can I plug the two heads into each cab? What I want to end up doing is have an ABY switch from my guitar straight to the Marshall ...
5
votes
2answers
396 views

What makes an amp sound heavy?

What I want to know is what makes some amps sound the way they sound like the Sunn Model T/Sunn Scepter or the Ampeg VT22. What are the components inside the amps which give it a round, fat , heavy, ...
1
vote
1answer
1k views

How can I connect speakers to my POD 2.0 and get a good sound?

I like to practice at home with my electric guitar, but I have to keep the volume low, so I usually use headphones connected to my P.O.D. 2.0 guitar direct box. But sometimes I'd prefer to use ...
3
votes
4answers
1k views

Valve and solid state guitar amp power comparisons?

is there a chart or general rule of thumb of how the different power levels for a valve amp compare to an equivalent volume solid state amp? for example, 5 watt valve amp similar volume to 20 watt ...
11
votes
4answers
1k views

Valve (tube) amps and clean tone

Is there any difference in clean tone sound between a valve/tube amp and a solid state amp? i.e., does having a valve in an amp affect the clean channel, or only the distorted channel? Apologies for ...
4
votes
5answers
5k views

Choosing a guitar cabinet

I have settled on the amplifier head to buy for my guitar, but I am not sure of the cabinet yet. I know that there are open-back vs closed-back options, and I assume that the quality of the speaker ...
7
votes
5answers
2k views

Guitar Amplifier (Head versus Combo versus None)

I'm in the process of getting my first electric guitar and am trying to figure out amplifiers. I currently have a stereo amplifier and pre amplifier and a pair floor standing speakers. My living space ...
2
votes
1answer
269 views

Bolt 100 watt amp making a phaser noise

My Bolt amp is making this wierd noise. Sounds like a flanger or phaser when pushed hard with my OD pedals. I have never heard this noise before in any amp. Could it be the Phase Inverter tube? The ...
9
votes
2answers
342 views

What do they mean by 'This amp has a lot of headroom'?

Do they mean how loud it will go without getting distortion?
9
votes
3answers
2k views

How does The Talkbox work?

Beck started using this in the early 70's - they called it The Bag for a hot minute (as did Stevie Wonder) - Frampton's career came alive when he started using it - how does it work?
2
votes
3answers
95 views

Information about selling my guitars [duplicate]

Possible Duplicate: How do I assess the value of a guitar when I'm preparing to sell it? So I have three guitars that I want to sell. After this, I want to buy a pretty nice acoustic to ...
5
votes
5answers
635 views

How do I get pinch harmonics during solos?

Could someone tell me how to get the pinch harmonics sound during solos? Specifically on the "Wanted Dead or Alive" solo by Bon Jovi? Is it an amp setting? Is it something I do with my left or right ...
11
votes
6answers
2k views

Can you make your own Leslie Speakers?

I love the sound when employed with an Organ ( Jimmy Smith) and on Little Wing(SRV) - I vaguely remember seeing Kings X live once and I believe Ty Tabor had a pair of Leslie speakers that sounded ...
15
votes
3answers
9k views

Why is an amplifier's effects loop useful?

When should you plug gear into your amplifier's effects loop and not into the standard input?
13
votes
7answers
4k views

How do you mic a guitar amp?

How do you go about mic'ing a guitar amp for live performance? Would you do anything different if you were mic'ing the amp for studio recording? Is there anything specific I should look for in a ...
22
votes
6answers
3k views

Why do tube-based guitar amplifiers sound so good?

Is it just a cultural thing ("they've always sounded that way") or is there some basis in music theory for this?