12
votes
1answer
564 views

Why guitar sounds smoother in high frets?

When I (or you) pluck 2nd string fret 10, and pluck 1st string fret 5, which it's the same octave of the A note. Why when you pluck the 2nd string, it feels smoother than when you pluck the 1st ...
7
votes
1answer
269 views

Is there diference between black and white nylon in guitar strings?

Is there difference between black and white nylon?
1
vote
1answer
75 views

Do SIT (stay-in-tune) brand strings really stay-in-tune better than any others?

Do SIT (stay-in-tune) brand strings really stay-in-tune better than other brands of strings? I have bought them on occasion and did not really notice any length of time in-tune difference from the ...
6
votes
1answer
140 views

How do different strings (of the same gauge) affect the tone?

Something I've been wondering quite long, but never had the time to really try it out myself: Let's say I buy two sets of strings, both with the same gauge, a cheap one and an expensive one. What are ...
8
votes
4answers
938 views

Beginner replacing guitar strings

I am a beginner at playing the guitar, so I recently bought myself one and then managed to break a string whilst trying to tune it. After getting over the initial disappointment, I have ordered some ...
2
votes
1answer
565 views

Homemade ways to mute strings (eg hair scrunchie)

I've seen a ton of players using hair scrunchies, or similar soft bands to mute, or rather dampen strings. ...
1
vote
0answers
198 views

Where can I purchase Bass VI strings? I live in Portugal [closed]

im a guitar player from portugal, and recently, me and my band colleague decided to build our own baritone guitar as our band would benefit from the low end, but as we started researching on ...
7
votes
3answers
3k views

Putting steel strings on a cheap nylon guitar

I was trying to get back into playing guitar. I only took lessons for a few years with a nylon string guitar that was fairly cheap. When I pulled the guitar out of the attic it needed new strings so I ...
2
votes
0answers
64 views

Is there a way to lengthen the lifespan of my strings? [duplicate]

I have acidic fingers and my strings wear out rather quickly. I am using Elixir which is a lot better than most other brands, but after around two weeks it loses the clean sound, becomes hard (or ...
1
vote
4answers
347 views

Using bass strings on guitar

Would it be safe to use a 0.065 bass string as a B string(tuned to Bb) on a 7 string guitar with a scale length of 26.5?
0
votes
1answer
407 views

What gauge strings should I use for A# tuning on an electric guitar [duplicate]

I play heavy metal songs from bands such as Parkway Drive, Bring me the Horizon, Northlane etc. which play in A# guitar tuning. What gauge strings are appropriate for that?
3
votes
1answer
155 views

How long can I store shrink-wrapped strings?

While cleaning up, I recently found a box (still had 6 packs in it) of shrink-wrapped strings for my electric guitar: D'Addario EXL120 Nickel Wound 9-42. I guess they have been sitting around in my ...
3
votes
1answer
390 views

Tuning new strings on an acoustic guitar

Okay, so a while back I broke one of my guitar strings, so I bought a new set. The problem is with my new strings my guitar sounds awful. Like it doesn't sound new awful it sounds like its completely ...
3
votes
3answers
551 views

Which electric guitar strings have the least (pitch) bend

When playing my electric guitar, the pitch of notes varies depending upon how exactly the strings are fretted; this is particularly a problem with strings that are barred by the first finger, since ...
3
votes
2answers
980 views

How do Tape-Wound strings compare to metal Flatwounds?

I recently discovered that the nylon-coated Tape Flatwound strings, which have long been available for Bass, are available now in guitar sets (with plain b and e). How do these compare in tone, scrape ...
7
votes
1answer
583 views

How do I use string gauge tables?

I have seen that string manufacturers publish tables of string gauges and tensions. For example, this one. How can I use these to choose a set of strings for my instrument?
4
votes
3answers
247 views

Are there any (experimental) guitar strings whose cross-section is not a circle?

The answers to this question have led me to wonder: if you string a guitar with a differently-shaped string, would it have interestingly different sonic properties? And of course, since I can't just ...
3
votes
3answers
3k views

How to keep guitar strings from breaking so quickly?

I have a takamine g350 acoustic-electric guitar (not that it really matters for this quesiton), and my strings tend to break every two or three weeks. I do like to experiment with different tunings, ...
2
votes
2answers
257 views

Why does the quality of the sound of guitar strings decay over time?

Particularly, on classical guitars, strings 4, 5 and 6. At the beginning, the sound is very metallic. After a few weeks, it's like playing on coton.
2
votes
1answer
620 views

What strings can I use to get a high-quality sound out of a travelling guitar?

I've just purchased a Washburn Travel Guitar. I know I'll never get full guitar sound out of it, but I was wondering what strings I could / should get to (perhaps) maximise this little guy.
3
votes
1answer
299 views

How can I prevent loss of tuning when changing strings set from 0.11 to 0.12?

I have an Epiphone Les Paul Custom and it's tuned in standard C and my playing style is mostly Desert Rock. I'm using a set of 0.12 strings and considering changing to a 0.11 set to have less tension ...
3
votes
6answers
3k views

Incessant Buzzing on Third String (Classical Guitar)

I've had an ongoing issue with my classical guitar. The third string (nylon) always buzzes on first, second, and third fret. While we're at it, the sixth string (wound metal over nylon core) buzzes on ...
2
votes
3answers
312 views

Is there some type of classical guitar strings that have uniform tone across all six?

Whenever I try to adapt music for classical guitar I actively try to avoid transposing any note to the first string (High E) because it sounds so much more twangy than the other five. I understand ...
3
votes
1answer
117 views

Should I take the weather into account when I replace guitar strings?

I have been told that the strings in a guitar should be replaced at least every six months (I know this can be subjective). I have a classical guitar which has been several years with the same ...
7
votes
6answers
8k views

Is it good/bad to play guitar with low tension string?

When I started playing my acoustic(at an early age) I tuned the guitar just by matching notes. Like, matching the note of 5th fret of 6th string to open fret of 5th string and so on. I didn't used ...
5
votes
4answers
1k views

Which one has more impact on the sound, the string or the body?

Which exactly affects more on the sound of the guitar? is it the guitar body? or the string? How much the sound improves if I use good string on an old guitar? I know it really depends on the ...
15
votes
4answers
38k views

How does string gauge affect a guitar's sound and playability?

Guitar strings are available in a variety of gauges. What effect does my choice of string gauge have on the sound of my guitar? What effect does it have on playability?
0
votes
1answer
157 views

What should be the tension for 0.010 inch strings for guitar

0.009 inch(diameter) strings are tuned as E3, A3, D4, B4, G4, E5. Question is, does 0.010 inch diameter strings should be tuned in this tension? When I try to set these like 0.009 inch ones, the ...
0
votes
0answers
64 views

How can one minimise the percussive strumming sound on acoustic guitar and maximise the notes? [duplicate]

Possible Duplicate: How to prevent the noise my guitar pick makes? When we are rehearsing with the band it seems that the main thing that one can hear of our singer's acoustic guitar is the ...
1
vote
3answers
2k views

Can I play a regular guitar as a Lap Steel by replacing its strings with steel strings?

Is there any significant difference other then strings between "regular acoustic guitar" and an "acoustic lap steel guitar"? Is replacing the strings with steel strings enough?
4
votes
3answers
165 views

Is it possible for the unwound strings wear faster than the wound strings on a Guitar?

I have had my guitar for about 7 months or so now (this is my first) and i just learned a few weeks ago that you are supposed to change the strings every so often. well a couple of weeks before that i ...
2
votes
3answers
435 views

Do you ever play a barre chord without you index finger on guitar?

I would think the only finger you'd ever use to play a barre chord is you index finger. is this right? As in the finger you'd use to make the barre.
5
votes
3answers
2k views

Which strings should I use for DADGAD tuning on my acoustic guitar?

I have recently switched to DADGAD tuning, before that I was using light tension strings ( 12 16 24 32 42 53 ). But because of DADGAD, to compensate for the lack of tension on the neck, I wanted to ...
21
votes
12answers
28k views

Why shouldn't I put electric guitar strings on my acoustic guitar?

I've always found even the lightest acoustic (bronze) guitar strings to be a bit too heavy to play comfortably. Electric (nickel) guitar strings tend to be lighter. But nobody uses electric strings on ...
3
votes
5answers
12k views

Can I use nylon with steel string guitar?

I was wondering if it possible to put nylon strings on a steel string guitar. Is it possible? If not why?
9
votes
1answer
1k views

Flat-wound vs round-wound strings

What difference can you expect when playing with flat-wound vs round-wound strings on an electric bass/guitar? I know that they feel different - I am asking explicitly in terms of sound.
20
votes
5answers
2k views

Boiling/washing used guitar/bass strings - is it worthwhile?

I've read that some people boil their strings from time to time to make them sound again like they were new (and save some money). Is this really worthwhile, or are there any disadvantages to this?
7
votes
4answers
2k views

Is grease good or bad for guitar strings?

I was once told that playing a guitar with greasy fingers was actually good for the strings. However, this seems a bit counter-intuitive. Is there any truth behind this claim?
6
votes
4answers
459 views

new strings always relaxing. how do I speed up this process?

every time I replace guitar strings, the strings will always relaxing for a few hours to become stable. how do I speed up this process?
5
votes
6answers
2k views

Will steel strings wear out my nickel frets ?

I have bought some coated strings because I wanted to try that out. After my purchase I noticed that the package says the uncoated strings are stainless steel. Since my frets are made out of nickel ...
20
votes
5answers
1k views

Recycling guitar strings

This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging ...
8
votes
2answers
1k views

Restringing a 12-string guitar with heavier strings - is it possible?

I'm considering using a 12-string guitar I don't play all that much as a testbed: Is it possible to restring an acoustic guitar as a baritone guitar, or even just string it so I can tune it down a few ...
14
votes
7answers
2k views

How do I properly stretch my newly strung strings?

I came across this string stretcher device. It's called The Stretcha. It claims to properly and evenly stretch new strings and maintain tuning. I never really made a point to properly stretch ...
5
votes
2answers
719 views

How is string height adjusted for a neck with a compound radius ?

From what I understand, during a guitar setup, the string height is adjusted to follow the fretboard radius. How is string height adjusted for a neck with a compound radius ?
5
votes
4answers
5k views

Why does my Stratocaster guitar sound worse with new strings?

My 4-month-old strings sounded much better than the new set that I just put on. I am using the same brand of strings that I used before. My guitar sounds like crap now. What's wrong? Should I stretch ...
7
votes
1answer
249 views

Should I replace unwound strings on my acoustic guitar as often as the wound ones?

The wound strings wear off quite fast, and start sounding dull even faster, so I replace them quite often. But whenever I do so, I replace the unwound strings as well, even though at that point, they ...
7
votes
1answer
119 views

Strings stick to pickup poles when the tremolo is depressed.

Sometimes, when I depress the tremolo quite far, the strings magnetically stick to the pickup poles... Is this normal? Is there a way I can prevent it, aside from not depressing the tremolo so far? ...
15
votes
7answers
2k views

Coated Strings—Gimmick, or worth the money?

Never used them myself, but I had a friend who used to swear by the plastic-coated strings he bought for his electric to try and help keep them cleaner. While I realize this probably does do ...
22
votes
6answers
3k views

Do guitar strings wear when not used?

Do strings wear because of the pressure applied to them or any other factor, or do they stay in quite the same shape as long as you don't use them?
9
votes
4answers
4k views

How can I effectively secure guitar strings to the tuning pegs?

One of the bigger problems I face when restringing my guitars is properly securing the strings to the pegs. How should I wind the strings around the pegs before tightening them to prevent the string ...