Flexible material that provides vibrations in string instruments

learn more… | top users | synonyms

7
votes
1answer
295 views

Should I replace unwound strings on my acoustic guitar as often as the wound ones?

The wound strings wear off quite fast, and start sounding dull even faster, so I replace them quite often. But whenever I do so, I replace the unwound strings as well, even though at that point, they ...
7
votes
1answer
218 views

How do different strings (of the same gauge) affect the tone?

Something I've been wondering quite long, but never had the time to really try it out myself: Let's say I buy two sets of strings, both with the same gauge, a cheap one and an expensive one. What are ...
6
votes
6answers
2k views

Will steel strings wear out my nickel frets ?

I have bought some coated strings because I wanted to try that out. After my purchase I noticed that the package says the uncoated strings are stainless steel. Since my frets are made out of nickel ...
6
votes
3answers
364 views

How do you identify string gauge?

A friend broke a string on her bowed psaltery (a small zither-like instrument) and needs to replace it. Problem: what gauge? The source of the instrument is unknown and it didn't come with spare ...
6
votes
3answers
3k views

Which strings should I use for DADGAD tuning on my acoustic guitar?

I have recently switched to DADGAD tuning, before that I was using light tension strings ( 12 16 24 32 42 53 ). But because of DADGAD, to compensate for the lack of tension on the neck, I wanted to ...
6
votes
4answers
2k views

Which one has more impact on the sound, the string or the body?

Which exactly affects more on the sound of the guitar? is it the guitar body? or the string? How much the sound improves if I use good string on an old guitar? I know it really depends on the ...
6
votes
4answers
532 views

Softer strings?

I have picked up ukulele and have realized that the softer strings have helped me get used to the harder guitar strings. I was wondering if they made softer strings for a normal sized acoustic guitar ...
6
votes
5answers
7k views

My high E string broke after one week of replacing my guitar strings. Could that be an installation issue?

I'm not sure if it's even possible for the string to break based on how it was installed. The only reason I can think of is that it was installed on a loose tuning peg, which it wasn't (I made sure to ...
6
votes
4answers
666 views

new strings always relaxing. how do I speed up this process?

every time I replace guitar strings, the strings will always relaxing for a few hours to become stable. how do I speed up this process?
6
votes
2answers
747 views

Is it possible to tune a ukulele in GDAE (Irish tenor)?

I would like to change the tuning of my concert ukulele from GCEA to GDAE. Which kind of string do I need for that (diameter) ? Is it dangerous for the bridge ? (Ref. my ukulele is a Lanikai LU-21 CE) ...
6
votes
2answers
256 views

Correct process for replacing guitar strings

The steps I follow whenever I'm replacing guitar strings come from a diverse set of advices that I got in person, online or whatever, and I never asked any professional about them. I do it like this: ...
6
votes
1answer
214 views

what's the difference between light rosin and dark rosin?

I see two basic kinds of rosin available, light rosin and dark rosin. What's the difference between these?
6
votes
6answers
960 views

Violin strings breaking in fingerboard area

My violin's strings have been breaking every 3 to 4 weeks. I only practice about 10 hours a week. It is not normal for strings to be breaking constantly and though the problem could be an incorrect ...
6
votes
1answer
1k views

How do I change the strings on a double bass?

I have seen my double bass teacher change strings a few times, but I have a set of solo strings that I would like to learn how to put on by myself. I haven't been able to find much clear advice on the ...
5
votes
9answers
4k views

Incessant Buzzing on Third String (Classical Guitar)

I've had an ongoing issue with my classical guitar. The third string (nylon) always buzzes on first, second, and third fret. While we're at it, the sixth string (wound metal over nylon core) buzzes on ...
5
votes
5answers
10k views

What are the repercussions of using really thick gauge strings on my electric guitar?

I have a Jackson King V JS32T electric guitar in blue, see the linked text for specs and the look of it. Anyway, it came with 0.09-0.42 strings and I've been using 0.13-0.56's on it for a little ...
5
votes
4answers
6k views

Why does my Stratocaster guitar sound worse with new strings?

My 4-month-old strings sounded much better than the new set that I just put on. I am using the same brand of strings that I used before. My guitar sounds like crap now. What's wrong? Should I stretch ...
5
votes
2answers
3k views

right handed bass into left handed bass

I can't easily find a left handed bass guitar. Can I restring the bass to be for a leftie (reverse the ordering of the strings)? I think that you can do this with an electric guitar, for sure with ...
5
votes
3answers
523 views

what's the difference between a gauge .011 and a gauge .012 string?

As asked in the question, also a bonus question; how does the gauge of a guitar affect the tension of the strings?
5
votes
4answers
3k views

Playing Classical Guitar Pieces on a Steel-String Guitar

I'm an acoustic guitar player but have recently developed an interest in classical guitar. I'm not quite at liberty to buy a classical guitar (with nylon strings and what not) and the stool thingy, ...
5
votes
1answer
171 views

Why does a string instrument get out of tune when a string breaks?

Usually, when a string breaks on my guitar/bass, the remaining strings get out tune. Why does that happen?
5
votes
1answer
117 views

What strings for classical guitar you advise to beginer?

Recently, I found an old classical guitar(1989) in my cupboard and now I want to tune it up! But I need to change the strings. Which parameter of tension is better for beginners? Does the brand of ...
5
votes
3answers
246 views

Thicker or thinner gauge for frequently snapping harp strings?

I have a kora (West-African harp) on which the highest two strings only seem to last about a week before snapping. The two strings are tuned to A (880Hz) and G (784Hz) respectively and are stretched ...
5
votes
1answer
144 views

Is loosening the truss rod of a bass the correct thing to do after changing to a lighter string gauge?

I bought some new strings for my bass and was informed that 40 is what you find on most basses when they come out of the factory. I restrung my bass today and the stock strings are actually thicker ...
5
votes
1answer
104 views

Bow hold and broken thumb? Suggestions?

So it feels like I'm fighting the bow due to the angle of my thumb, it's not impossible but I could use a few pointers or suggestions. The standard bow hold is mildly ineffective for me.
5
votes
2answers
877 views

How is string height adjusted for a neck with a compound radius ?

From what I understand, during a guitar setup, the string height is adjusted to follow the fretboard radius. How is string height adjusted for a neck with a compound radius ?
5
votes
1answer
218 views

Storing unused guitar strings

I was going to change the strings on my guitar today with older string packs that I haven't completely used and a new pack. Since the low E, A, D, and G rarely break I have an excess supply of them ...
5
votes
1answer
54 views

Love Flatwounds, but need a bit more bite - thoughts?

I am a bass player in an instrumental post-rock trio. I have been using, and love, flatwound strings for years. I do a great deal of slides, pickoffs and such. I often use these techniques to build ...
4
votes
6answers
292 views

Stuck while trying to change the strings for the first time

Ok so I was able to remove all the strings but one and I am afraid the last one is stuck badly. I followed the various tutorials on replacing the strings: Removed tension-> pushed it in and tried to ...
4
votes
4answers
15k views

Which steel strings are more suitable for fingerpicking on acoustic guitar?

I want to ask acoustic guitar experts, what strings can be suitable for fingerstyle playing on steel string acoustic if I play with my fingers - no nails or fingerpicks. Currently I'm using GHS ...
4
votes
2answers
110 views

Is it normal for new bought ukeleles to be out of tune every few minutes?

I've bought a new ukelele and it's been quite a while since I've last held a musical instrument (a year, maybe), so it might be possible that I'm just quite rusty with toning a guitar/ukelele. I ...
4
votes
3answers
5k views

How to keep guitar strings from breaking so quickly?

I have a takamine g350 acoustic-electric guitar (not that it really matters for this quesiton), and my strings tend to break every two or three weeks. I do like to experiment with different tunings, ...
4
votes
3answers
190 views

Is it possible for the unwound strings wear faster than the wound strings on a Guitar?

I have had my guitar for about 7 months or so now (this is my first) and i just learned a few weeks ago that you are supposed to change the strings every so often. well a couple of weeks before that i ...
4
votes
2answers
95 views

Too much string on the tuning peg?

I just finished changing the strings for my classical guitar. This is the first time so it wasn't absolutely smooth. Now, tuning my E string (the highest) I noticed that it gets quite tense and all. ...
4
votes
2answers
220 views

Why does my violin's A-string show signs of damage after only a week?

I changed my A-string on my violin due to accumulated damage (over 1 year of playing) about a week ago. Now the new A-string has tiny dings and what looks like slight unraveling. The damage seems to ...
4
votes
1answer
361 views

How can I prevent loss of tuning when changing strings set from 0.11 to 0.12?

I have an Epiphone Les Paul Custom and it's tuned in standard C and my playing style is mostly Desert Rock. I'm using a set of 0.12 strings and considering changing to a 0.11 set to have less tension ...
4
votes
1answer
638 views

What string gauge should I use for my 7th string on a guitar

As per this question, I bought myself a very nice Ibanez 7 string which I have tuned as A-D-A-D-G-B-E (giving a very nice fat sound which works with the kind of music the band plays) I didn't think ...
4
votes
2answers
1k views

How does the angle of strings above the headstock affect tone and stability?

The situation: I'm about to widen the slots in a new nut for a 12-string guitar. I'm using .015 strings (up from .011 or so), and tuning the guitar down significantly; my test-run with .014 strings ...
4
votes
3answers
326 views

Do most professional guitarists use string lubricant?

New electric guitar strings seem to almost stick to the fingers, and within hours start to turn gray/black-ish in the spots I've played them most. By contrast, lubricating and cleaning the strings ...
4
votes
3answers
288 views

Are there any (experimental) guitar strings whose cross-section is not a circle?

The answers to this question have led me to wonder: if you string a guitar with a differently-shaped string, would it have interestingly different sonic properties? And of course, since I can't just ...
4
votes
2answers
2k views

How do Tape-Wound strings compare to metal Flatwounds?

I recently discovered that the nylon-coated Tape Flatwound strings, which have long been available for Bass, are available now in guitar sets (with plain b and e). How do these compare in tone, scrape ...
4
votes
1answer
115 views

The details behind proper string slack for new strings

So this question covers string instruments with tuning pegs (eg. guitars, bass guitars, mandolins, ukuleles, etc). When you are installing a new string and you pull it tight for the first time, you ...
3
votes
3answers
798 views

Which electric guitar strings have the least (pitch) bend

When playing my electric guitar, the pitch of notes varies depending upon how exactly the strings are fretted; this is particularly a problem with strings that are barred by the first finger, since ...
3
votes
5answers
22k views

Can I use nylon with steel string guitar?

I was wondering if it possible to put nylon strings on a steel string guitar. Is it possible? If not why?
3
votes
1answer
1k views

After re-stringing acoustic guitar my action feels way off.

I recently bought an acoustic guitar, and it had this beautiful action on it. I've restrung it recently (same gauge strings) and now there's a very noticeable difference in playability. Is this ...
3
votes
5answers
183 views

Difficulty tuning in Drop D

I went to a guitar shop yesterday to buy a new set of strings and had them replace my old ones. The guitar sounds fine like the usual eadgbe sound but when I tried tuning it to drop D using a guitar ...
3
votes
2answers
331 views

Mathieu Crickboom “The violin” method

My teacher insist on teaching Mathieu Crickboom's The violin books. The violin has 5 volumes. it usually take 5 years for 5 volumes. I don't know is it good method? what's the most famous method ...
3
votes
1answer
598 views

Tuning new strings on an acoustic guitar

Okay, so a while back I broke one of my guitar strings, so I bought a new set. The problem is with my new strings my guitar sounds awful. Like it doesn't sound new awful it sounds like its completely ...
3
votes
3answers
4k views

Acoustic Guitar | How to adjust the gap between the strings and the fret board

I have a 2 year old acoustic guitar . Over the period of time there's a huge gap that has appeared between the higher frets and the strings. What has caused this gap? and How do i fix this.
3
votes
2answers
224 views

Guitar not holding tension

I've recently come into a problem with my guitar. Simply enough, I'm having trouble keeping one of the guitar strings in tune. I've played flamenco guitar for about four years and blues guitar for a ...