Skip to main content
13 events
when toggle format what by license comment
Dec 5, 2023 at 18:01 history bumped CommunityBot This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Aug 7, 2023 at 17:03 history bumped CommunityBot This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Jul 8, 2023 at 16:45 answer added Laurence timeline score: 0
Jul 7, 2023 at 21:40 answer added user93643 timeline score: 0
Jul 7, 2023 at 21:08 history bumped CommunityBot This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Mar 9, 2023 at 21:05 history bumped CommunityBot This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Feb 7, 2023 at 19:33 answer added empty timeline score: 1
Jan 26, 2023 at 17:13 comment added Tetsujin @Yorik - yes, line & mic inputs are different beasts entirely [even before the line/instrument option] not only raw levels but impedances too. Unbalanced mics shouldn't be used on line-level inputs; those cables are meant for cheap mixers without phantom or balanced line… low-end karaoke/pub DJ levels of equipment;)
Jan 26, 2023 at 15:43 comment added Yorik I don't have this equipment, but I do see people state that plugging into the 2i2 using XLR-1/4" TS is line level and about 6dB less gain than the XLR-XLR preamp. Also, if using the mic with 1/4" make sure the "Instrument" switch is toggled off
Jan 26, 2023 at 9:09 comment added Tetsujin Is the mic on a balanced line [XLR-XLR] or to an unbalanced jack? Does the hum vary with physical distance from the amp? Does it vary if you rotate the amp in relation to the mic?
Jan 26, 2023 at 4:34 history edited rcplusplus CC BY-SA 4.0
added 151 characters in body
Jan 26, 2023 at 4:22 history edited rcplusplus CC BY-SA 4.0
added 365 characters in body
Jan 26, 2023 at 3:09 history asked rcplusplus CC BY-SA 4.0