1

Amp model: Roland JC-77

  • How to fix broken speaker connection terminal?

OR

  • Where to buy a replacement part?

See picture below

enter image description here

2
  • Closing as this doesn't fit our site scope.
    – Doktor Mayhem
    Nov 10, 2021 at 12:15
  • You are so right Doktor Mayhem! It should have gone to the electronics stackexchange indeed. I am glad some people had the chance to help before you closed the question though :)
    – zabumba
    Nov 10, 2021 at 13:50

2 Answers 2

2

It's not the sort of thing you can normally buy, because it comes riveted to the speaker.

Avoid pulling on it. The speaker wire is fragile.

Does the speaker still work? If so, I would attempt to glue it back on with something nice and strong, such as two-part epoxy (Araldite) and something to act as a splint across the break.

2
  • yes speaker works! will try to glue with 2 part epoxy!
    – zabumba
    Nov 10, 2021 at 0:13
  • 1
    Just be sure, when the job's permanent, not to let the two connections touch each other - amps don't like that.
    – Tim
    Nov 10, 2021 at 9:33
1

There are plenty of broken speakers around - pop to a music shop repair section. Should get one for free! But only if you're handy with a soldering iron, and gentle handling wires.

Otherwise, two part epoxy will do - make certain the two wires/connections can't short against each other or the metal of the speaker frame.

2
  • The OP already has a broken speaker, how does getting another one for free help?
    – ojs
    Nov 10, 2021 at 9:46
  • @ojs - aw, come on! Most speakers have broken cones or coils. In 60 yrs, I've only ever had the same broken bit like OP's once, and have thrown away many, many speakers with the bit OP needs intact.
    – Tim
    Nov 10, 2021 at 10:35

Not the answer you're looking for? Browse other questions tagged or ask your own question.