2

I am building a Les Paul style guitar from parts I bought online.

Unfortunately, I noticed that I've got the wrong neck, the body is cut for a set-in neck with a tab at the end of the heel which goes into the bottom of the neck pickup cavity. The neck I have does not have this tab.

Can I still use it, because it fits into the body quite nicely? Or will this create a weak spot in the back of the body itself?

2
  • 2
    Maybe you could give some pictures?
    – Lazy
    Nov 25, 2023 at 22:00
  • I'm not a big LP guy, but I think what your body wants and your neck doesn't have is called a "long neck tennon". I have no opinion about whether that'll lead to problems to your build. Maybe look into luthier forums elsewhere? Nov 27, 2023 at 20:50

1 Answer 1

2

Bear in mind that Les Paul style guitars have set necks. Their necks aren't bolt/screw on, like, say, Strats. 'Fits the body quite nicely' - I'd want it to be such a fit that it'd need a vice or such-like to press the two together. There's also the neck angle to work out - that's pretty well dictated by the pocket and the shape of the neck heel. May/may not work.

If it was mine, I'd expect to glue and screw. Consider also where fret 12 will sit once it's in place - there's only so much adjustment in saddles, or where the bridge will go, for good intonation. Once glued and screwed, properly, it will be strong enough but use a good quality 2 part epoxy, and remember once it's fixed, it's fixed.

1
  • ”once it's fixed, it's fixed“ … not if you do it the guitar builder’s way and use hide glue. Resetting the neck on old guitars is not that uncommon. Won’t probably work out with epoxy though.
    – Lazy
    Nov 27, 2023 at 11:29

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.