5

I bought an electro-acoustic guitar last week and i've been playing quite a bit.

Today I noticed there was a slight buzz on the

5th String 3rd fret (C)

and the

6th String 8th fret (C)

Its the same note thats causing it and sounds like its coming from inside the guitar rather than the frets. Is this easily fixable?

  • Maybe this can help you: music.stackexchange.com/questions/6813/fixing-fret-buzz – Shevliaskovic Jan 20 '14 at 22:29
  • @Shevliaskovic Surely if it was fret buzz it would effect multiple strings and not just C2 – Edd Jan 20 '14 at 22:33
  • I have a similar issue with my acoustic on the D string 14th fret, it's always buzzed, it briefly got better, then got worse again. Think it's just down to how it was built, it was fairly cheap - £180 – Pixelomo Feb 12 '16 at 17:25
8

The most likely cause is that something is resonating when ever the C note is played. If it sounds like it's coming from inside you can use a chopstick to (gently) touch internal parts to isolate the noise. It may be easier to tune the A or D string to C so you don't have to fret a C note while doing this, this step will also rule out fret buzz as the source. A small make up mirror taped to a chopstick can help you see inside the body.

Possible sources are: A loose brace, a loose wire (if you have a pickup & preamp system), things like that.

  • 2
    Thanks for the help! I managed to identify what was buzzing, turns out it was the battery pack at the bottom of the guitar. I removed the battery and the buzzing stopped. I just need to find a way to damp the vibrations so i can put the battery back in... – Edd Jan 20 '14 at 23:05
  • 1
    Great, that's a common problem, often guitars are shipped with a bit of foam in the battery slot to stop that happening. – Fergus Jan 20 '14 at 23:19
  • 1
    Some insulting tape around the battery will hold it enough so that it doesn't move. – Tim Jan 21 '14 at 9:48
  • Insulting tape has many uses... Sometimes it even isolates you:-) – ohno Nov 7 '16 at 15:25
0

Well, for locating resonating parts in instruments, a cheap vibrator with soft/rubbery surface can be quite useful. The surface consistency is for feeding the vibrations into the instrument's body rather than having the thing rattle/snare at contact point. In a pinch, you can likely use a rubber chicken as intermediary. Just make sure that nobody else gets to see the contents of your instrument repair chest.

Actual bona fide back massagers tend to be too much on the strong side to play well with instruments.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.