Why does the 5th string of a 5 string banjo usually start from the 5th fret? From the perspective of a beginning guitar player, it looks rather cumbersome both to play and manufacture. Wouldn't this make some chords impossible, that would be possible if the 5th string began at the peghead?

enter image description here

2 Answers 2


If the fifth string were to be extended up to the peghead, it would be an exact duplicate of the first string (both D notes) since they tend to be the same gauges.

But to answer: Having that string truncated at the 5th fret makes it a G note. In traditional Scruggs Style banjo, it is primarily a high-root drone string. Since most tunes on banjo are native to G, having a drone on the root is the best sounding configuration. If we capo up two frets to A, there is usually a corresponding spike or other method to also capo that truncated string down below. Then the drone would be in A for a song in the key of A.

Melodic style playing uses it primarily as a scale note. This method gives you more freedom on the first string to go around the root note since you can always grab the root itself up on the 5th string.

  • Hard to manufacture? Yup. Just paid almost 2K for a new neck.
  • Hard to play around? Not really, you get used to it being there.
  • Do some makers tunnel the 5th string to be properly fretted at 5, but tunneled all the way up anyway? Yes. (See: Robin Smith or Rob Bishline, to start)

Regarding your side comments about some chords being impossible: It depends on how much of a purist you are. I'll try to articulate this, and I must assume some banjo familiarity... In standard tuning, the 1st and 4th strings are tuned to D, an octave apart. The 3rd and 5th string is tuned to G, an octave apart, and the 2nd string is a B. So when fretting a D major chord with the standard "D-shape", you have the 1st and 4th strings as the F#, the 2nd string as the root (D), and the 3rd string as an A. The 5th is unchanging, for reasons explained above. Now if you were to grab the 7th tone of that chord, you would have to rearrange and grab it above on the 2nd string (reach up to the C), which means that you are jettisoning the root note. I don't believe a chord is a chord without it's own root, textbook-wise. We have to make these sacrifices a lot given our duplicate strings and restricted instrument range. So to a purist, yes, some chords are impossible, but to a banjo player they are all very possible and effective: Since we are usually playing in context of a guitar and/or bass, we have plenty of external support playing the root for us.

  • 1
    Caveat: In my D7 example above, I use the D chord as the base. There is a better way to play a D7, specifically, but then you lose the 3rd tone of the chord so the effect still happens to some degree. The more general rule above about losing the root tone applies to all other root tones, as-is, from D# thru C#. I simply wanted to avoid the extra confusion of "Make an E chord with the D shape..."
    – Grey Dog
    Commented Oct 13, 2014 at 11:14
  • Regarding "Hard to play around.": I quickly got used to it being there as far as getting my LH thumb past the tuner. What I haven't really mastered is remembering to properly crimp the "slack" end of the string - when a tiny little bit of it is poking out of the hole in the tuner, and your thumb slides up for an impromptu impalement in the middle of a tune....Ouch! I got myself a banjo with a tunneled neck, and feel much safer now. OSHA would approve.
    – Adam
    Commented May 11, 2015 at 23:09
  • 1
    I wholeheartedly agree. Instead of the tunneled neck, I opted for a (cheaper) box of band-aids for such impalement occasions.
    – Grey Dog
    Commented May 12, 2015 at 23:16

The Wikipedia article on banjos explains it thus:

The modern 5-string banjo is a variation on Sweeney's original design. The fifth string is usually the same gauge as the first, but starts from the fifth fret, three quarters the length of the other strings. (The long-necked Vega Pete Seeger model starts the fifth string from the eighth fret.) This lets the string be tuned to a higher open pitch than possible for the full-length strings.

I've seen the opposite done on orchestral double basses. There "most professional orchestral players use four-string double basses with a C extension. This is an extra section of fingerboard mounted on the head of the bass which extends the fingerboard under the lowest string and gives an additional four semitones of downward range" (quoting Wikipedia)

double bass c extension

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.