I want to make an electric guitar by myself from scratch. How can I do this?

  • 2
    Check out www.projectguitar.com for lots of tutorials, links, and inspiration (look at their Guitars of the month - simply beautiful). The forum community is a great resource for advice and project documentaries, with great members and archives going back almost 10 years.
    – crasic
    Mar 19, 2011 at 23:33
  • Brian May of Queen built his own guitar when he started out when he was on tour the crew nick named it "the sideboard " bit of trivia for you
    – Anonymous
    Mar 20, 2011 at 16:45
  • 3
    While it's oriented towards acoustic guitars, the book Guitarmaking: Tradition and Technology is a classic and well worth browsing before approaching building any guitar. Mar 21, 2011 at 4:26

5 Answers 5


I have made a couple and it isn't that difficult...but in saying that it does depend on exactly what you want to build.

Acoustic guitars - really hard work, as every decision will have impact on tone, so I'll just talk about electrics:-)

  • We have discussed winding your own pickups - doable, but probably not a good use of your time.
  • Necks - can be very challenging. This is one area I haven't mastered, so ended up buying ESP necks (which I like as they make some very fast, reasonably slim necks)
  • The body is a piece of cake - as long as you have decent woodworking tools and experience. A table router makes everything really easy. Choose your wood sensibly (for my first one I chose a really hard Malayan pine, and went through router bits incredibly fast - but that guitar has lasted me 23 years so far, so it is pretty strong)
  • Electrics make a big difference. There are plenty of example circuits, all of which sound different, so if you are a beginner I would go with one similar to the classic Stratocaster circuitry. Passive and very simple.

I would recommend two books above all others. The Melvyn Hiscock "Make your own Electric Guitar" and Ralph Denyer's "The Guitar Handbook" as they are very well laid out and explain the trickier bits well.

Best of luck with it - it takes a long time to do well, but it is so rewarding to use your own guitar up on stage. Out of all my guitars, the one which feels fastest is still my original home built one.

  • To what extent should an electric guitar's structure be expected to affect the sound, and to what extent should the contact points with the strings attempt to minimize energy transfer (so the body would receive very little sound energy to "do anything with")? I've wondered sometimes about whether it would make sense to construct an electric guitar with a cast stainless steel frame, rather than using wood with a truss rod. Weight along the fretboard and near the bridge would seem more helpful at minimizing energy transfer than weight elsewhere, and...
    – supercat
    Jun 8, 2014 at 16:51
  • ...I would think a stainless steel frame would be dimensionally more stable than wood under conditions of varying humidity. No way I could cast such a thing myself, but I'm curious how the cost and performance would compare with more "conventional" approaches. Having the "guitar guts" of a guitar be a solid assembly that could be placed into any desired body (which would not have to endure mechanical stress) would have a certain appeal, and could also help make the instrument more portable.
    – supercat
    Jun 8, 2014 at 16:55
  • There have been various metal guitars but none have been as successful as wooden ones. There is a lot of the arcane about wood choice for each component, and while you should be able to make them out of anything, it doesn't appear to work that way. Not sure why - it may just be tradition, or difficulty...
    – Doktor Mayhem
    Jun 8, 2014 at 17:05
  • Oh, and while metal is generally better at coping with humidity change, it is far worse at coping with temperature changes
    – Doktor Mayhem
    Jun 9, 2014 at 15:53
  • Given that the strings on an electric generally have steel as the "tension" element (do any wound strings use something else?), having the guitar expand about the same amount as the strings would probably be a good thing. I don't know how the COE of stainless compares with the alloy used in strings, but unless it's vastly greater I would think uniform expansion in the structure would be a good thing for tuning stability. BTW, I have both a 3/4 and full-scale guitars, and the 3/4 is more comfortable to play, but the change in tension when a string is plucked means notes change pitch...
    – supercat
    Jun 9, 2014 at 16:01

I would strongly advice getting a book for this, as there are many steps and you will want a complete thorough step by step guide. I would suggest reading through the book before starting the project. This way you wont get any nasty surprises in the middle of building. I don't think you will find a good enough source online (at least for free) to make a really good guitar.

By reading the book you minimize the risk of doing the same mistakes that other first time builders do.

Here are a couple from Amazon:

You will need a lot of patience and a lot of time. The hardest part to build is the neck, so you might want to think about buying a neck and only build the body. However, if you have time and some skill there is no reason not to build the neck as well.

I would have low expectations for the quality of your first own built guitar. It won't be a PRS... But you will learn a lot while building and your second one will already be a lot better. However if you do things right you will get a very nice and at least personal guitar!

I have built one myself and I never use it, since I like my Tele better... But I am totally going to build another one sometime when I have time and a place to do so.

One more advice: When deciding on the shape of the body I would recommend building a shape that does not exist (unless you really want it to be a Strat or Les Paul) since this will make your instrument a lot different and much more personal than by just making a copy of something else.

Good Luck!

  • 5
    +1 for buying a neck. A buddy and I built an electric once, and the amount of skill (and tools) required for laying out and cutting the neck were significantly higher than for the body. We wound up buying a neck and had a great time building the rest. I don't think we would have had as much fun, or as good a guitar, if we'd done the neck ourselves. Not to discourage you -- if you want to make your own neck, go for it! But if you're more interested in playing than building, you might have better luck with a pre-made neck.
    – Anonymous
    Mar 18, 2011 at 14:15

Just to add to @mrbuxley's great answer:

Unless you have access to some serious equipment this is going to be a very expensive and time consuming venture ;). You might be better off purchasing a pre-made neck and body from a reputable manufacturer such as Warmoth and then assembling all the parts yourself. The fun part about this (well for me anyway) is picking out the finish, all the hardware, building the electronics with my own crazy circuits, and knowing that I have an instrument specifically designed and suited to my every whim. Also, if you go this route you could have the instrument in playing condition less than a couple of weeks.

If you build your own from scratch--including purchasing blanks to mill the body and neck from, you are going to have a lot of scratch in the guitar. Also, finishing a guitar is a black art. I have friends who have tried and gotten varying degrees of success--but as @mrbuxley indicates your first attempt will never be as high quality as what a professional painter can do; and likely your second, third fourth, fifth, and well you get the idea. You could spend a couple of years perfecting your technique in this single area in order to get to luthier grade quality.

So, my recommendation is to head over to Warmoth's site, find a body you are in love with, pick a neck that compliments it, go buy all your hardware, and be up and running with your new guitar in a couple of weeks. However, if you truely are hardcore, and wish to build watch your instrument go from a solid block of wood to something beautiful then prepare for a serious learning experience and a very time consuming but rewarding process. And who knows, if you get really good at it, you could be the next John Suhr selling your guitars to the likes of John Mayer, Mark Knopfler, and David Gilmour.

  • Good idea with warmoth. I remember Jackson having something similar years ago where you could design your own guitar. It was fun to play around with but the price tag always ended up way over my budget...
    – user399
    Mar 18, 2011 at 14:52
  • my way around this was to redo the finish every few years for my first self-made guitar. It has got better every time, but it is very simple to strip and redo. It has changed shape a couple of times too, as I've redone the balance as I have learned what I prefer.
    – Doktor Mayhem
    Mar 20, 2011 at 23:08

There's been a lot of advice to buy a ready made neck, and if your woodworking skills aren't top notch that is a very good plan to begin with, but if you want to get a little more adventurous you can buy pre-slotted fretboards from some places like stewmac which takes a big part of the pain out of the equation, especially if you want to do something different to a traditional bolt-in neck, like a neck through construction or something.


I'm not sure how "from scratch" you want to be. If you find yourself in over your head starting from say, a large tree and a mound of iron ore, you might want to look at some kits or components.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.