Recently tried Veillette and Rob Allen basses, both incredible instruments. Unfortunately, they're also incredibly expensive. Part of what I loved was the feel of the tapewound strings. What would happen if I changed my steel roundwounds on an American Lakland bass to tapewound strings? In other words, what kind of sound could I expect vs. the two basses I tried?

  • Interesting. I didn't actually know you could use these with pickups. Will have to try out a set now. – Anonymous Jan 25 '11 at 13:34
  • Guitarists can use them too! music.stackexchange.com/questions/9502/… – luser droog Jul 14 '13 at 1:59
  • I put a set of tapewounds on my Jazz Bass in 1973, and every time I take it ot of the case it's rarin' to go. I take it in for routine maintenance, other cats play it, nobody ever asks how old the strings are or have anything negative to say about the sound! – user7130 Sep 23 '13 at 0:58

Tapewound strings are similar in construction to other wound bass strings; the difference is that they have a length (or 'tape') of nylon wrapped around a metal core. This makes them feel less tough on fingers, and the tone they produce does not quickly degrade in time, as standard round/flatwound strings will.

The Sound they produce is different as well. They deliver a warmer, rounder, softer and smoother tone (because they will produce less string noise). Another word you will hear a lot when describing tapewound strings is 'thump.' For this reason, they are said to produce the closest sound to an upright bass that can be produced on an electric bass.

I have never come into contact with either of these basses, but from a spot of research I understand that they both have a 'semi-hollow' body design and construction. I would presume that this would add a fair amount to the sound, but the strings would also contribute a lot as well.

Replacing your current strings with tapewounds is likely to have a noticeable effect on the sound, but the body construction and the tonewoods that are used are also likely to be a major contributing feature to the bass's tone and sound.

Hope this helps.

Sources: Rob Allen Guitars and Veillette Guitars


I see a lot of instrumentalists confuse tapewounds and flatwounds from roundwounds and other material strings.

Flatwounds are regular roundwounds that are ground-down, in fact, you usually have to wipe off the excess machining from them before installing or else your fingers will blacken.

Tapewounds are correctly described above.

Tapewounds will inherently seem a little "softer" or have less attack since they are wrapped in a material that doesn't fundamentally ring true to the original string. Flatwounds give you a very similar feel to tapewounds (which feel great for jazz guitar too, BTW) but have a bit more metallic sound to them, and will sustain a bit longer as well, since there is no softer nylon material to deaden vibration.

All bass strings are expensive, especially ones that require extra work aside form the winding. A good wipe down every once in a while, and after a serious session will extend the life of them as gunk tends to get into the crevasses of the metal windings and corrode.

But here's some pricing examples of the two:

Tapewounds are indeed more labor intensive, but you may be able to find a more affordable set of flat-wounds which are more comfortable on your fingers and slightly less work to produce, therefore cheaper.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy