The nut on the outside was a bit loose, then when I took the cable out and put the guitar away, the jack fell inside the body. Not sure how I can get it out and reattach it to the hole without completely taking apart the guitar.

The guitar is an Ibanez AK95 so has f-holes on each side, which don't really seem big enough to allow me to root around inside the guitar.

Even if I did have to take the guitar apart to fix it, how would I go about doing this? I can't find anything on the net discussing how to take apart semi-acoustics or even acoustics, only eletric guitars.


I'd get needle-nose pliers and pull the jack towards the hole, then insert the pliers into the jack and hold them open. The pressure against the inside of the jack should be enough for you to pull it through the hole.

  • 1
    And perhaps a coat hanger, suitably bent, perhaps with a little double stick tape to help manipulate the jack into position from the inside. Gently of course
    – horatio
    Jul 21 '11 at 15:07
  • I did something like that. I used the pliers to get hold of it, then I stuck a small screwdriver into the hole and guided the jack along it until it came out of the other side. Then I screwed it in.
    – Gnuffo1
    Jul 21 '11 at 21:31

I did something similar, using a piece of stiff wire with a hooked end to pull the jack through. Its also useful to point a lamp into the f hole so you can somewhat youre doing.


Removing a jack socket from a semi-acoustic, I have used a 3" long rawlplug slightly wind the screw in to grip anchor with string to feed back through the f hole works!

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.