2

So, I cocked up today. I recently moved house and dragged out my amp head and cab today, hooked everything up and was jamming away to check it all still worked fine. Sounded a little odd, but I put that down to me not hearing for it a while. After about an hour, I then decided to find my delay pedal and stick it in the FX Loop. This is when I noticed I hadn't plugged my cab into the speaker output, but plugged it into the line out instead. I naturally immediately switched the amp off and corrected the mistake, switched it back on and everything sounded perfectly fine. I'm a little worried I may have damaged the amp, as I know you're never supposed to run an amp with no load. What are the chances I've damaged the amp?

Specifics: Amp is a Bugera TriRec

Cab is a Marshall 1960AV

Ran from Line Out to Cab for about 1 hour Immediately changed the cables upon notice of my mistake

Thanks!

3

If your amp works and if it sounds OK you haven't damaged it. We all know that tube amps shouldn't be operated without a load, but depending on the exact circuit and on the power tubes, most tube amps can survive such a condition for a while, and it looks like yours has survived. I haven't actually experienced a single case where the tube amp would be damaged immediately in such a case. What may have happened is that the life span of your tubes has been decreased a bit by operating them without load.

Some amps switch on an automatic dummy load if the speaker jack is not connected (my Koch Twintone does so); in that case the tube amp doesn't even notice if you don't connect a speaker. You can check if yours has such a built-in dummy load. But if not, no worries, the amp still works and it is probably more resilient than you think.

  • I played for about another hour after switching the cables and it all seemed fine! I just know how fragile tubes can be, so I immediately assumed the worst. Luckily, it's an Infinium amp, so the tubes should last longer than normal anyways. Thanks for the help! – Jamie Brace Nov 21 '16 at 9:37

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.