I've seen some inexpensive guitar pickups to amplify any kind of acoustic guitar, but I don't know if there's something like that for a jarana, and how good the sound quality is.

Is there something specific I can ask about when shopping for a mic/pick-up? (i.e. hertz, ohms, etc.)

What is the recommended way to amplify it? Does it require some sort of instrument modification?

I hope I'm not asking too many things in a single question, any help is appreciated, thank you very much.

1 Answer 1


A jarana has many of the same characteristics as a ukulele. Since ukuleles are so popular, I would recommend searching for information about amplifying ukuleles.

One option is simply to point a directional condenser microphone at the sound hole. This works well if sound levels aren't too high on stage, and the player is not moving around.

You can also get microphones which clip onto the sound hole. This way the player can move around, but feedback and sound leaking from other sources are an issue.

Alternatively, you're looking at ways of turning your acoustic jarana into an electric-acoustic jarana.


An electric guitar pickup detects the vibrations of the strings directly, which it can do because they are metal and cause disturbances in a magnetic field. For the nylon strings of a jarana, ukulele or classical guitar you need a different solution.

  1. An internal microphone - a microphone secured to the inside of the instrument
  2. A soundboard transducer - a little disk that attaches to the soundboard and translates the vibration into an electrical signal. Sometimes more than one is used, to sample different parts of the soundboard surface.
  3. An under-saddle transducer - a rod shaped unit that fits under the saddle and picks up vibrations there.

The microphone and the soundboard transducer are able to pick up more of the character of the instrument, but are more prone to feedback (the kind of howling feedback you tend to associate with a microphone). Under-saddle transducers are less prone to feedback, but tend to sound a bit more sterile, since you are picking up the saddle's vibrations before the instrument's body has been able to give its character to the sound.

Usually all of these are fitted permanently, often with the lead socket placed at the base of the instrument where a guitar's strap button would be.

It's possible to fit a combination of these.

Fitting is tricky for a few reasons. It may involve drilling into the instrument. The placement of components could affect the tone of the instrument when played unplugged. Placement of soundboard transducers affects the tone. Loose wires rattle. Working inside the instrument through the sound hole is fiddly.

For these reasons, you may prefer to ask a professional to do the fitting.


You have choices here. If you want to amplify the sound of the instrument without adding any extra character to the sound, then plug into a hi-fi amp or a PA. In either case, you'll need a pre-amp to bring the signal from instrument level to PA level.

Pre-amps designed for acoustic guitars will do a good job. Ones recommended for ukuleles especially so, I suspect.

Alternatively, use an acoustic guitar amp. These are designed to add colour to the signal from an acoustic guitar, and often provide effects like reverb and chorus, without doing the kind of overdrive and distortion that electric guitar players want.

  • great answer! very detailed and useful, just one more thing: how expensive (comparatively) is each of the three options you mention?
    – jambriz
    Jan 4, 2012 at 18:01
  • You can spend as little as $10 or over $100. I can't make a reliable comment about how well the quality matches the price.
    – slim
    Jan 4, 2012 at 18:08

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.