I am thinking of putting together a pedal board and am having trouble trying to configure or plan out how my clean and overdrive channels will work. My hope is that on one of the loops for a pedal switcher, I can loop a reverb and a chorus to always be on during clean; and, also include the overdrive but not be active until I press that channel switch. By turning on the O/D pedal, I would like to then have the reverb and chorus turn off.

Is this possible? or would I have to use two loops and press both simultaneously? Hopefully this isn't confusing. Basically I am looking to switch 3 pedals: 2 off and 1 on. Then 1 off and 2 on via the same channel.

  • So you want to have "O/D" as one option, and "reverb + chorus" for the other option? If so, a Boss LS-2 with "O/D" in one loop and "reverb + chorus" in the other should do the trick. – topo Reinstate Monica Dec 3 '16 at 6:47

A/B Switch. I've done something similar involving a looper. In your case, if I'm interpreting correctly:

Guitar -> A/B Switch

A -> Rvb/Chor

B -> o/d

New problem: Two leads, one input on the amp. I tried all sorts of MacGuyvering (2 -> 1 1/4" adaptors do NOT work) before just buying an 8 track mixer.

A -> Input 1

B- > Input 2

mixer out -> amp

So long as the levels for 1/2 are equal, and you don't mess with them, you should be fine.

A four track mixer, or even a DJ-esque 2 line would be fine, but my gear doesn't move much, and got into "might as well" pretty quickly. Also, there was a used one at GC for $20. Done.

There are also direct input devices (http://thehub.musiciansfriend.com/live-sound-buying-guides/how-to-choose-the-right-direct-box), but I've never quite understood them, and don't really have a use for a preamp.

Yet. Have fun.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.