3

I recently bought a Crate G130C XL used, but it did not come with any pedals. I tried looking at the manual, but it’s only 5 pages and did not seem to specify which type I need. From what I can gather, I think I need a two-button pedal where one button switches the channels back and forth and the other switches the reverb on/off. Also, I guess I can get a pedal for the chorus switch? Any help or links would be appreciated as I don’t want to buy the wrong ones or damage the amp.

  • Being aware of what sockets are in the amp. is a good start. Speaking to Crate themselves is another. – Tim Jun 9 '18 at 7:34
0

If memory serves me correctly, the footswitch for channel switching on this amp is a temporary contact switch as opposed to the more common single pole/ double throw footswitch used in other amplifiers. The channel switching in this amp is actually done by transistor circuitry inside the amp and is activated by an temporary change in the circuits relationship to the amplifiers ground caused by stepping on the footswitch.

  • Contacting Crate was my first thought but all I’m finding through my searches are “out of business” articles and no customer service numbers. Thanks for trying to help me. I’m sorry, I’m only medium electronic saavy. I don’t really know what those things means but I was kind of looking for a link to a pedal that would likely work. For instance, do you know if this one would work? amazon.com/dp/B000VXKUL0?ref_=pe_623860_70668670_dpLink – Billy Campos Jun 10 '18 at 21:18
  • @Billy Campos- I looked at your link and as best I could tell it's not what you're looking for. I'm working off memory here, but what I remember about the design of this amp is that the switching is accomplished by causing the control voltage of the switching circuit to go to ground. An easy way to check if I'm correct, would be to plug a regular guitar chord into the footswitch jack on the amp with the amp switched on. Then make contact between the phone jack tip and sleeve on the phone jack at the other end of the cable. Doing this should cause the amp to switch channels. – skinny peacock Jun 11 '18 at 20:06
  • You may need to talk to an electronic supply house to buy the footswitch and mount it in an old footswitch box if you're handy that way. Another idea is to do a search for momentary contact footswitches. I hope this helps. – skinny peacock Jun 11 '18 at 20:13
  • I guess I got lucky, but I found the original channel switch pedal for the amp on eBay for only $10 and bought it. Thanks for the help! – Billy Campos Jun 25 '18 at 17:38

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.