Recently I bought a Blackstar Series One 10 AE tube amp. I was trying to connect the amp's speaker emulated output to the input of my Focusrite 2i2 (1st gen), which goes to FL Studio 20 as a track that I want to record. But there's no sound coming into the interface. The green ring around the gain knob of the interface doesn't light up. I've made sure both the guitar and amp are sending adequate volume. But if I connect my Audio Technica M50x headphone (38 ohm) to the emulated output, then I can hear the sound properly. I've also checked the lead wire that connects the emulated output to interface, and it's working fine. Moreover, if I connect my guitar directly to the interface, it works as it's supposed to.
Any input is appreciated, as I need this feature to record my compositions using FL Studio. I've gone though the amp's manual which can be found here, but couldn't find anything useful. I'm tabulating all relevant specs below:
- Laptop: Dell Inspiron 5370
- OS: Windows 10 (v1903)
- Interface: Focusrite Scarlett 2i2 [1st gen]
- Driver: 18.104.22.1684
- Amp: Blackstar Series One 10 AE